Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Damaged Centre Diff Cross

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
User avatar
Jay
Posts: 251
Joined: Wed Sep 01, 2004 1:41 pm
Location: Lebanon

Damaged Centre Diff Cross

Post by Jay »

Hey

Well the sound ended up being a broken centre diff cross shaft?
Any idea what could have caused this breakage. I tought LT 230 were among the most durable.
Could it be from the 36" tyres?
I will post up some pics tomorow how much should they be to fit on this forum 50 K?
96 Disco Gamel Trophy 36"*12.5 ET'II's, F&R ARB's,4.75 R&P GBR,GBR F&R
83 Rangie 2" OME Still Stock
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Post by HSV Rangie »

shaft in rover diff is what lets go and usuyaly destroys diff.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

HSV Rangie wrote:shaft in rover diff is what lets go and usuyaly destroys diff.

Michael.
Sounds like he is talkin in the tcase Michael.
I know Jac Mac does a one peice stronger cross shaft, for the LT230. Not sure on price thou.
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Post by HSV Rangie »

looks like it to.

still same applies the 23 piece cross is what lets go.

fit a jacmac 1 piece cross they cost about $ 150.00

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Posts: 157
Joined: Mon Jul 14, 2003 2:12 am
Location: Exmoor England

Re: Damaged Centre Diff Cross

Post by tony cordell »

Jay wrote:Hey

Well the sound ended up being a broken centre diff cross shaft?
Any idea what could have caused this breakage. I tought LT 230 were among the most durable.
Could it be from the 36" tyres?
I will post up some pics tomorow how much should they be to fit on this forum 50 K?
spinning wheels offroad without difflock engaged.
not the tyres IMHO
Defender 90 Modified
Defender 110XS Standard

[url=http://www.lr4x4.com]lr4x4.com[/url]
User avatar
Jay
Posts: 251
Joined: Wed Sep 01, 2004 1:41 pm
Location: Lebanon

Re: Damaged Centre Diff Cross

Post by Jay »

tony cordell wrote:
Jay wrote:Hey

Well the sound ended up being a broken centre diff cross shaft?
Any idea what could have caused this breakage. I tought LT 230 were among the most durable.
Could it be from the 36" tyres?
I will post up some pics tomorow how much should they be to fit on this forum 50 K?
spinning wheels offroad without difflock engaged.
not the tyres IMHO
yes it is the T-case center diff shaft that broke....is it common on rovers?
Have any one of you upgrade it?

I ve never spun tyres with diff lock not engaged could it be from slow crawl (1st low 4.75 ratio)?
You do not have the required permissions to view the files attached to this post.
96 Disco Gamel Trophy 36"*12.5 ET'II's, F&R ARB's,4.75 R&P GBR,GBR F&R
83 Rangie 2" OME Still Stock
Posts: 532
Joined: Tue Mar 23, 2004 11:39 am
Location: Melbourne

Post by Davidh »

From memory Mike Smith blew a centre diff at Ateco a few years back, or it might have been Roger, not sure.
Anyhoo, as an aftermarket is available, it must be a weak link!

Another alternative, go part time, as you replace the centre diff in the conversion process.
And if you damage any other front end components while you're wheeling, you can unlock hubs, go 2wd and drive home.
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Post by HSV Rangie »

Go with the jac mac one piece cross.

around $150.00 much stronger.

Michaelo
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
User avatar
Jay
Posts: 251
Joined: Wed Sep 01, 2004 1:41 pm
Location: Lebanon

Post by Jay »

HSV Rangie wrote:Go with the jac mac one piece cross.

around $150.00 much stronger.

Michaelo
Micheal

Is this a common weak like in LR and related to larger tyres?
What about the corss shaft that came on the RR with a center retainer...
Can't rememebr jack mack website and e-mail can you send it.
Thanks
You do not have the required permissions to view the files attached to this post.
96 Disco Gamel Trophy 36"*12.5 ET'II's, F&R ARB's,4.75 R&P GBR,GBR F&R
83 Rangie 2" OME Still Stock
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Post by DiscoDino »

Jay,

As I told you, I don't recall me EVER breaking mine, if TOny says otherwise, then maybe he's right, I may have lost track of what I've already broke...

Anyways, Michael is right, Cross shaft from JM is GREAT. Their website is http://www.mcnamaradiffs.com.au/ & I recall it being 165 AUST $. This is the peice:
You do not have the required permissions to view the files attached to this post.
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests