Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

RESISTANCE WIRE

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

RESISTANCE WIRE

Post by Loanrangie »

Does the rover electronic dizzy have a resistance wire?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 490
Joined: Sat Oct 30, 2004 3:44 pm
Location: Sydney

Post by Philip A »

Ok the things I do.
I just had a look at the 87 wiring diagram and it says no resistance wire on 87 model. I assume all high energy coils will be the same.

Look at the coil . There wuill be 2 wires on positive , one is power to coil and one power to ign module. Both should have 12 volts. If there isa third with 7 volts then that is resistance wire, but wshop manual says no.
Regard s Philip A
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

I didnt think it did, but the haynes manual is so vague when it comes to various models- you either have late or early. Just checking on how to run power to a hei dizzy that is waitng to be fitted.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests