Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

cutting shock towers, 80series shocks.

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 47
Joined: Mon Mar 28, 2005 5:38 pm
Location: shiteney

cutting shock towers, 80series shocks.

Post by DARTHrover »

hi all,

how much do the std S1 disco front towers need to be
cut for the 80series toyo shock's????

or does someone make custom ones??


DARTH
Challenge excepted!
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

I think its more of a case of how high do i need to lift to make 80series shocks work?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

approx 2-3 inches on a standard rover
Top
Posts: 884
Joined: Mon Sep 01, 2003 8:59 pm
Location: melbourne

Post by defender kev »

With 2"springs in my 110 and Rangie i have spaced the shock towers up 1" and have not had any problems using 80 series shocks :D
"Why do the British drink their beer at room temperature? Because Lucas builds their refrigerators."
Top
Posts: 1403
Joined: Fri Jul 11, 2003 7:59 pm
Location: Melbourne

Post by DaveS3 »

Depends, there is a long and standard version.

Possibly having to mod bump stops as well, depending on lift height.
Land Rover Discovery - GQ conversion underway
Top
Posts: 490
Joined: Sat Oct 30, 2004 3:44 pm
Location: Sydney

Post by Philip A »

LRA sells spacers for this. They go under the tower.
Regards Philip A
Top
Posts: 47
Joined: Mon Mar 28, 2005 5:38 pm
Location: shiteney

Post by DARTHrover »

cool thanks guys! :D

now i think about it, corse its up??? derrr :oops:

LRA did nt inform me of the spacers when i was quizzin them
about it.
oh well brain fade only affects russel crow :twisted:
Challenge excepted!
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

I extended my towers
cut and inserted 75mm diam exhaust tube aprox 50mm longer.

work perfectly.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

AnthonyP wrote:approx 2-3 inches on a standard rover
That was refering to the use of 2" over standard (lifted) 80series shocks.
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

i used 25mm solid bar in 25mm lengths.
drilled through and tapped from both ends.
remove turrett, screw on spacer, replace turrett on spacers, use new grade 8 bolts to screw down turrett.
what i now do when we install shocks on any 4b is mark the full compressed length of the shock by compressing it then running a texta around the body.
i do this at full extension, then mark halfway as well.
this is an easy way to measure up for spacers or check bumpstop length.
just remember to leave an inch for bumpstop compression.
david
Top
Posts: 17
Joined: Sun Nov 07, 2004 2:29 am
Location: Germany

Post by desertrover »

What is the advantage in installing Toyo Serie 80 shox into a rover?
Please shet some light on this!
See ya and happy rovering
Stephan
Top
Posts: 500
Joined: Tue Nov 04, 2003 2:00 am
Location: Canada

Post by red90 »

They have more travel.

http://members.shaw.ca/red90/shockinfo.html

Also make sure you check if the springs need retentions (depends on your springs) and you will need longer brake lines.
[color=red]1991 Landrover 90 ex-MOD[/color]
Top
Posts: 47
Joined: Mon Mar 28, 2005 5:38 pm
Location: shiteney

Post by DARTHrover »

thanks again guys!

is there any advantage of running the front shocks outside the coil???
Challenge excepted!
Top
Posts: 500
Joined: Tue Nov 04, 2003 2:00 am
Location: Canada

Post by red90 »

Easier to change the shocks.
[color=red]1991 Landrover 90 ex-MOD[/color]
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

DARTHrover wrote:thanks again guys!

is there any advantage of running the front shocks outside the coil???
None, unless you want to use twin shocks.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest