A mate of mine destroyed his rear CW&P and cant seem to get the the pre-load and backlash settings out of Toyota.
He also wants to know if there is any tricks to tightening up the lsd.
7th 1999 3.0 Litre Hilux
Thanks Sean
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux Pre-load and backlash settings
Moderators: toaddog, Elmo, DUDELUX
hilux Pre-load and backlash settings
Short GQ, Petrol, Turbo.
GQ TD42 ute
GQ TD42 ute
Their are shims for the clutch packs available at toyota if the parts jockey knows how to use his computer. You could cut your own if you had to they have to be the same as the friction plate with the ears on them.
You can also put another spring inside the other spring or a hardened washer.
You can also put another spring inside the other spring or a hardened washer.
I'm not stuck I'm over here!
Watch where you driven!!!
Watch where you driven!!!
4wd show
Yes , In a long winded kind of way.
Will try the parts guy for the shims as well.
Thanks for the help
Short GQ, Petrol, Turbo.
GQ TD42 ute
GQ TD42 ute
Who is online
Users browsing this forum: No registered users and 0 guests