Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Mitsubushi TD04-11G

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 510
Joined: Fri Feb 04, 2005 7:31 am
Location: Brisbane

Mitsubushi TD04-11G

Post by whiteknight »

am looking at a 2nd hand Mitsubushi TD04-11G Turbo for my 2.8d Hilux..

I cant seem to find much on the net - anyone know if these are any good?

And what the costs are to do the seals and bearing overhaul?
Top
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Yes they are pretty good.
CAPA use the Mitsi TD04 or TD05 with their turbo kits for normal diesels.
They are good for about 12 PSI anymore than that will shorten their life.
They are a relatively small turbo so spin up very quickly giving very good response - perfect for diesels.
The TD04 was standard for the early Paj 2.3 and 2.5 turbo diesels.
I know Guts ran a Mitsu turbo on his Lux before the V8 and he was pretty happy with it not sure which one he had though. I remember him saying it was small and spooled up very quick.
I just luv my "clacker Jabber"
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

I run this exact turbo in mine, has been in there for about 3 years/60,000 k's, hasnt missed a beat. Its now pushing 11psi and reaches 500 degrees post turbo at full load, generally though it rarely goes over 400.
Yurich Design Services
www.yds.net.au
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 7 guests