Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Patrol Import

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 106
Joined: Wed Apr 06, 2005 2:39 pm
Location: Everywhere

Patrol Import

Post by xplot »

HI all

OK i am now looking at 2x SWB Patrols and they are both imports, now i was wondering what people thoughts or experiences with SWB Patrol Imports or any imports in that nature.

Thanks
Posts: 447
Joined: Mon Dec 15, 2003 8:44 am
Location: Townsville

Post by BigMav »

all good except for 24Volt electrical system is a pita. :roll:
1989 Ford Maverick Turbo Diesel Tourer
4" spring lift 2" body lift
33" MT/R's
Posts: 106
Joined: Wed Apr 06, 2005 2:39 pm
Location: Everywhere

Post by xplot »

ummm can you change the 24 volt to 12 volt easy?
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

as far as i can see you will need a new starter, alternator, all new bulbs, glow plug timer, relays, the works, and if its auto, the autos might operate on the voltage of the rig so tyhat might need mods
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

24V isnt that much of a pain in the arse.......

winchs at 24V have less current draw, so smaller cabling. and you can get a 24 to 12V converter to run some 12V accessories, although i think you will find that it already has one, it just may not be large enough to do more than the standard 12V accessories
Posts: 136
Joined: Wed Mar 03, 2004 2:29 am
Location: Gold Coast

Post by MQPatrol »

Pretty sure there is 2 different looms - one 24v and another for 12v.

I have done a 24 to 12 conversion in a MQ and while it was successful the actual gauge of the wiring seemed less and hence things got warm like the wiring to the headlights.

Safari's are a good thing, i am happy with mine so far.
Duct tape is like the Force,
it has a light side, a dark side
and holds the universe together.
Posts: 2678
Joined: Fri Feb 27, 2004 2:35 pm
Location: Crestmead

Post by Doggy »

My shorty safaris awesome....and bling. Only problem I have is that over a couple of months my passenger side battery drains itself so I have to just charge it up with a battery charger.
And before everyone says anything, yes I have checked it all out and still cant find out what the hell is doing it :?
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

We just worked on an import and it was awsome. Very tidy and low Kms. I would not worry about the 24volt system or changing it to 12volt. Plus I believe the jap 4.2's are stronger than the Aus ones.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

ludacris wrote:Plus I believe the jap 4.2's are stronger than the Aus ones.
whats the difference?
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

bogged wrote:
ludacris wrote:Plus I believe the jap 4.2's are stronger than the Aus ones.
whats the difference?
they are edzachery the same except for some pollution control gear.
Free air locker to the first 20 callers!
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

I read somwhere that Kym Bolton imported a Jap 4.2 to build up because they are built tougher than the Aus version.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

ludacris wrote:I read somwhere that Kym Bolton imported a Jap 4.2 to build up because they are built tougher than the Aus version.

LudaCris
Nah rumour was he brought a crate motor off nissan then took it to a race shop and had it blue printed and race prepped.
THOUGHT FOR THE DAY....
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

Ah ok. I think binskin done his motor work.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

Where do you find these import ones and how much would you expect to pay for a eairly model GQ?
Its not cool, unless it's got boost :)
Posts: 2678
Joined: Fri Feb 27, 2004 2:35 pm
Location: Crestmead

Post by Doggy »

the price up here in gods country for my 88 swb safari was about 15000, a mate paid 16000 for his lwb. These were both bought from import car yards so we paid a bit more because of that but both were in great condition and both had about 115000kms on them so it wasnt really a concern. If your looking at getting one I recommend it as I have had no major probs with mine and its sweet as :D
Post Reply

Who is online

Users browsing this forum: No registered users and 135 guests