Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Do all rangies run the Lt230 or only sertin models.
If so what did it come out in
What low range gear ratio dose it come with & can you gear other gears for it
LT230 came out in 5 speed RR. All 4 speeds are a one piece gearbox/transfer. they continued on in the disco's in both auto's and manuals
Some of the RR auto's (depending which one) had LT230 but not all of them did.
Low range is 3.32 no matter what it is out of, only the high range is different
you can get maxi drive low range gears (only change low range), they have 4.1's and I belive just brought out a lower (4.5 ?) version again. both require case grinding.
All t/flite, and 5spd 's were lt230, after market conversions using a b/w or ford auto used the cut down lt95, and also the zf auto models upto when the b/w viscous transfer came out.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
GURU wrote:LT230 came out in 5 speed RR. All 4 speeds are a one piece gearbox/transfer. they continued on in the disco's in both auto's and manuals
Some of the RR auto's (depending which one) had LT230 but not all of them did.
Low range is 3.32 no matter what it is out of, only the high range is different
you can get maxi drive low range gears (only change low range), they have 4.1's and I belive just brought out a lower (4.5 ?) version again. both require case grinding.
Maxi drives new gear set is a 4.9 not 4.5. I have a set of these in my buggy. Dont be put off by the case grinding its easy to do with a 4" angle grinder.
RUFF wrote:
Maxi drives new gear set is a 4.9 not 4.5. I have a set of these in my buggy. Dont be put off by the case grinding its easy to do with a 4" angle grinder.
yeah i wasn't sure..hence the ? on the new maxi set.
the grinding isn't a problem but it does take strength out of the case if too much has to be taken off (don't think maxi's are a probelm though)
[i]DAS[/i]
MY05 4.4L V8 Range Rover Vogue
Series 2a Buggy....In the Building
GURU wrote:LT230 came out in 5 speed RR. All 4 speeds are a one piece gearbox/transfer. they continued on in the disco's in both auto's and manuals
Some of the RR auto's (depending which one) had LT230 but not all of them did.
Low range is 3.32 no matter what it is out of, only the high range is different
you can get maxi drive low range gears (only change low range), they have 4.1's and I belive just brought out a lower (4.5 ?) version again. both require case grinding.
Maxi drives new gear set is a 4.9 not 4.5. I have a set of these in my buggy. Dont be put off by the case grinding its easy to do with a 4" angle grinder.
No difference fitting gears to a lux t-case So what is one of these LT230
worth and what are the gears worth.
GURU wrote:LT230 came out in 5 speed RR. All 4 speeds are a one piece gearbox/transfer. they continued on in the disco's in both auto's and manuals
Some of the RR auto's (depending which one) had LT230 but not all of them did.
Low range is 3.32 no matter what it is out of, only the high range is different
you can get maxi drive low range gears (only change low range), they have 4.1's and I belive just brought out a lower (4.5 ?) version again. both require case grinding.
Maxi drives new gear set is a 4.9 not 4.5. I have a set of these in my buggy. Dont be put off by the case grinding its easy to do with a 4" angle grinder.
No difference fitting gears to a lux t-case So what is one of these LT230
worth and what are the gears worth.
You can get a whole Rangie for under a grand if you look hard enough. Just make sure it has a torque flyte in it. Also look at 5 speed Countys.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
dave wrote:So what is one of these LT230
worth and what are the gears worth.
I have seen a few of them go for about $300 in the past. The Maxi Drive 4.1 gearset was $1700 last time I asked, so I imagine the 4.9 set is the same or more.
GURU wrote:The Ashcroft gears are 650 pounds and 96 pounds to to get them here to your door.
So thats around $1900 I'm estimating..
Had a quote from Dave Ashcroft. If we can get 5 sets together, 500 pounds each plus freight.
Worth trying to get a bulk buy.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
GURU wrote:The Ashcroft gears are 650 pounds and 96 pounds to to get them here to your door.
So thats around $1900 I'm estimating..
Had a quote from Dave Ashcroft. If we can get 5 sets together, 500 pounds each plus freight.
Worth trying to get a bulk buy.
If so let me know as I am trying to cut cost on the Crawler Unit (bolts to PTO output) as the gears dont interest me.
So far its just looking way to exxy to bring one in on my own if i can save abit in both purchase price and shared freight I would be a much happier chappy
Under Drive------£1,500.00
Frieght------------£295.00-TNT-economy-express
Gears-------------£150.00
Sub Total---------£1,945.00
Convert to-$-----0.4155 Current rate
Cost in dollars---$4,681.11
Duty--------------5%
Duty Amount----$198.56
Under Drive------£1,500.00
Frieght------------£295.00-TNT-economy-express
Gears-------------£150.00
Sub Total---------£1,945.00
Convert to-$-----0.4155 Current rate
Cost in dollars---$4,681.11
Duty--------------5%
Duty Amount----$198.56