Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Running Different diff Ratios

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 24
Joined: Thu May 05, 2005 4:24 pm
Location: ellalong

Running Different diff Ratios

Post by suzi_shawn »

What happens when running different ratios what other problems does it cause and so on

thanks
Posts: 3614
Joined: Sat Nov 02, 2002 9:02 am
Location: Gold Coast

Post by 83 lux »

wheels turn at different speeds binding up the t-case and snapping it into 100000000000000000000 pieces

you can get away with 11% difference i think
but yer not really something you should do

Ruff did run 4.11 in the front and a 4.3 in the rear but i really dont know how that turned out

Scotty
HOOLAY Wish i could buy boggers for my DH bike
Posts: 3556
Joined: Mon Dec 13, 2004 7:58 am
Location: Western Sydney

Post by Busiboy »

Not very pretty results,

Wind up etc, Hard to change out of 4x4 and the whole exploding transfer case thing.

If you try it hook up a video camera underneath focused on the transfer, would be funny to watch.

I doubt running anything but matching ratios is really a good idea.
Something witty said by someone famous
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

this would be very bad,

imagine navigating a side slope and your front wheels are woundup so bad they break traction and send you over/sliding etc.

when your wheel spinning it wont be a problem, its when you are crawling in precarious positoons that will be a major problem. Also driving on bitumen for even short periods will cause significant windup and could lead to breakages very easily. (although according to some people driving on bitumen in 4wd is not a risk!!!!!!!!!!!)

why cant you get the same ratio diff?, different model diff housings front and back? or just to lazy/cheap :P
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

There was a thread on this in the zook section a couple of weeks ago from memory. I think CJ posted it.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

83 lux wrote:wheels turn at different speeds binding up the t-case and snapping it into 100000000000000000000 pieces

you can get away with 11% difference i think
but yer not really something you should do

Ruff did run 4.11 in the front and a 4.3 in the rear but i really dont know how that turned out

Scotty
I wouldnt do it with a hilux Transfer unless it was to finish a competition. Mine worked fine because i run a Rover Transfer that has a centre diff so unless the centre diff is locked it causes no problem at all.
Posts: 188
Joined: Mon Aug 02, 2004 12:31 pm
Location: Dandenong-Victoria

Post by bigpat »

Friend drove his Bronco on beaches, with 4.11 front, & 3.5 rear. Fried clutch, and f%$ked t-case was the result......
BIG.PAT
'92 Surf 2.4 TD 5 speed.
More Boost, Intercooled),
Body & sup lifts, 31x10.5 Simex M/Ts (Bigger soon) & Big Boomin Stereo!

More to come when the $$$$ sum.....
Posts: 156
Joined: Mon Dec 09, 2002 10:25 am
Location: Canberra

Post by Roktruk »

Yup, simple answer - don't do it. Even running different tyres front/rear can cause wind up, and unless there's some wheelspin, breakage occurs. Ages back this was aksed, and I calculated the differnce in wheel speed with the exact ratios mentioned. Not pretty
Post Reply

Who is online

Users browsing this forum: No registered users and 58 guests