Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

75 series T/C in 80 Series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 53
Joined: Sat Jan 10, 2004 12:23 pm
Location: Hunter Valley, Scone

75 series T/C in 80 Series

Post by Bazz107 »

Hi,

Does anyone know if a 75 series transfer case will bolt up to 96 80 series GXL Deisel, I want to convert mine to Part-time 4wd and am having trouble finding DX Transfers, Also if it is possible will I still need new tail shaft and can I use the 75 series linkages and Wiring.

thanks
Byron
83 60 Series cruiser, 33 Muddies, Rear locker, UHF, Custom Boxes, Pleanty dints.
Top
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

marks adaptors sell a kit to turn full time 4wd 80's into part time. It has gotta be cheaper than buying a whole transfer case and fitting it.
My Cruiser is Environmentally Friendly.

It runs on recycled Dinosaurs.
Top
Posts: 615
Joined: Thu Oct 23, 2003 12:37 pm
Location: Brisbane, QLD.. Posts: Too Many.

Post by Meldge »

I have a 73 series and the transfer is gear driven, apparently the 80 series is chain driven - correct me if wrong...

I don't know what a 75 series is though...

Are they really that hard to find, as I was looking at doing this for my next truck?
Meldge...

86' Landcruiser - MWB Soft Top
Kustom, Kustom and more Kustom to Kome,
Store bought is not as fun...

[quote="Meldge"]Not too long, not to short, it's Middy - It's Just right... :armsup:[/quote]
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

75 wont fit....go to marks 4wd $550 with freewheelin hubs
Top
Posts: 552
Joined: Mon May 26, 2003 2:47 pm
Location: across the pond

Post by beanz2 »

The only way it would fit is if you also fit the gearbox from the 75 series to the motor. Then you have to resize both of your driveshafts.

Dave
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest