Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU front axles+cv's the same lenght as the GQ?!?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 127
Joined: Mon Jul 21, 2003 6:56 pm
Location: Bucharest, Romania, Europe

GU front axles+cv's the same lenght as the GQ?!?

Post by Gabriel »

Hi,

who knows if:

- the front axle and CV"s from GU are the same lenght as the GQ?
- if the GU front diff can be mounted in the GQ axle tube? I mean, it should, but only by eye...need advice, please.

Because, if they are the same lenght and the GU diff can be mounted in the GQ tube, it means that in order to upgrade to a GU front the only things that must be solutioned are the oil sealers inside the axle tube...

many thanks, Gabi
GQ MWB 105 ", DID Mitsubishi engine with big turbo, fiber glass body, Boogger 38.5/11/16, 2x8274, 5 link front, triangulated 4-link rear, SAW 14" and 16" coil-overs, , 5.1 r&p.
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

GU CVs too big for gq end housings... period.
Axle length differs to. Can be trimmed on a cut off saw but why?
If you get it working youll have dozens from here asking how as a few have tried before..

Bazzle
Top
Posts: 127
Joined: Mon Jul 21, 2003 6:56 pm
Location: Bucharest, Romania, Europe

Post by Gabriel »

Bazzle, thanks. What about the GU diff? Can be mounted on the GQ housing?! As I have 5.1 ring&pinion that are mounted on GQ diff...I wonder if I can use it on GU diff also, that's why I'm asking about the diff GU....

Thks, Gabi
GQ MWB 105 ", DID Mitsubishi engine with big turbo, fiber glass body, Boogger 38.5/11/16, 2x8274, 5 link front, triangulated 4-link rear, SAW 14" and 16" coil-overs, , 5.1 r&p.
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Post by CRUSHU »

the drop out centre is completely interchangeable.
Top
Posts: 127
Joined: Mon Jul 21, 2003 6:56 pm
Location: Bucharest, Romania, Europe

Post by Gabriel »

Great!! It means that if I weld the GU axle housing ends to the GQ housing, I will be able to use the same axle housing, the ring&pinion I have with the GU axles...Isn't?!

At least, the GU cv's are so good as the people sais?!?
GQ MWB 105 ", DID Mitsubishi engine with big turbo, fiber glass body, Boogger 38.5/11/16, 2x8274, 5 link front, triangulated 4-link rear, SAW 14" and 16" coil-overs, , 5.1 r&p.
Top
Posts: 454
Joined: Sat Oct 09, 2004 8:26 am
Location: Brissy

Post by The Big Green Meany »

Gabriel wrote:Great!! It means that if I weld the GU axle housing ends to the GQ housing, I will be able to use the same axle housing, the ring&pinion I have with the GU axles...Isn't?!

At least, the GU cv's are so good as the people sais?!?
Not sure if that will work, I'de change the whole diff, Well Im doing the exchange shortly, you get a better turning circle with the GU, I know you can use the GQ centre in the GU with 1 mod .........Sound easier to do the whole exchange to me....Less Drama....Less chance for breakage also.
Top
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Contact:
Contact Wendle

Post by Wendle »

Gabriel wrote:Great!! It means that if I weld the GU axle housing ends to the GQ housing, I will be able to use the same axle housing, the ring&pinion I have with the GU axles...Isn't?!
yes, it works. it has been done before.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests