Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sierra Universal Joints

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 8
Joined: Tue Mar 01, 2005 10:32 am
Location: Albury, NSW

Sierra Universal Joints

Post by Roady »

Could someone give me a partcode or advice in regards to the uni's on my 88 WT Sierra.

I went down to Repco but they wanted $160 (40 a pop).
The Heavy duty ones for my VN SS weren't that much.

Am I being cheap or is that a fair price??

Bob
Top
Posts: 1569
Joined: Tue May 11, 2004 9:43 pm
Location: Newcastle

Contact:
Contact HRZOOK

Post by HRZOOK »

yeah thats about right

mine cost close to that about 12 months ago
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

check what brand they are as repco usually selly dodgy ones, go to coventries think from memory they are toyo brand these are greasable and u should be using greasable unis.
Top
Posts: 378
Joined: Tue Nov 02, 2004 8:54 pm
Location: blue mountians

Post by superzuki »

i got one for my zook for $25 at scotts auto one... has a grease niple. not sure of the brand......oh and i got a discount for being a member of panthers..
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

i sell the greasable toyos for $35 each....

ol members cost is $28 each... plus freight..

have not had any returns with this brand so far...

i also stock both types... internal circlip or external circlip.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 526
Joined: Tue Aug 24, 2004 2:22 am
Location: Sydney

Post by Podge »

Sierra 1.3 (and Vitara) use non OE Uni Joint P/No. RUJ1783 ie. GMB etc. Most places use this P/No. except for CBC (their P/No. starts with a K, but can't remember the rest). Most non genuine UJ's using the P/No. RUJ1783 have grease nipples.
http://stores.shop.ebay.com.au/4wd-products
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

stay away from gmb unis u get wat u pay for.
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

bazooked wrote:stay away from gmb unis u get wat u pay for.
yes very.

all my $25 unis failed fast

all my $35 toyo unis are still fine

I go to bearing wholesalers in bayswater down road from cheezy racing.

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

mud4b wrote:i sell the greasable toyos for $35 each....

ol members cost is $28 each... plus freight..

have not had any returns with this brand so far...

i also stock both types... internal circlip or external circlip.
which ones have external and internal? or is this luck of the draw.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

nicbeer wrote:
mud4b wrote:i sell the greasable toyos for $35 each....

ol members cost is $28 each... plus freight..

have not had any returns with this brand so far...

i also stock both types... internal circlip or external circlip.
which ones have external and internal? or is this luck of the draw.
1.0's have internal

1.3's external.

same cup size, thats why hybrid yokes can be used for conversions

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 8
Joined: Tue Mar 01, 2005 10:32 am
Location: Albury, NSW

Post by Roady »

Thanks for the info fellas.

MUD4B: I've PM'd you.
Top
Posts: 526
Joined: Tue Aug 24, 2004 2:22 am
Location: Sydney

Post by Podge »

I've never had a problem with GMB UJ's but everybody else I talk to has had the opposite experience. The other UJ that I have found to be good is the CBC product. Really, you can really only go by personel experience-my experience comes from over twenty years of selling Suzuki genuine and non genuine parts.

However, GMB waterpumps are very hard to fault.
http://stores.shop.ebay.com.au/4wd-products
Top
Posts: 73
Joined: Thu Jul 03, 2003 9:02 am
Location: Australia, Gold Coast QLD

Post by Sirzooky »

I got toyo ones for 25 bucks each. I have to do them tomorrow but got internal for my "85 sierra, are these the wrong ones? should i get the external ones? do i have to pull it apart to know?

cheers

sadiq
Ando
Have
"07 Mazda BT-50
Offset rims, tints + UHF
Had
"96 Coil Sprung Sierra
31s on Offset 15x7s
2" spring lift + 2" BL
Top
Posts: 526
Joined: Tue Aug 24, 2004 2:22 am
Location: Sydney

Post by Podge »

Every chance that your UJ's are incorrect if they have an internal circlip. The P/No. for 1.0l Sierra is RUJ1795, which are an internal circlip.
http://stores.shop.ebay.com.au/4wd-products
Top
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

ive been doing dealing with tailshafts and unis for the last 11 years at my old place of work, so u get to no whats good and whats not.
Top
Posts: 73
Joined: Thu Jul 03, 2003 9:02 am
Location: Australia, Gold Coast QLD

Post by Sirzooky »

its an "85 1.3 sierra, do i need internal or external circlips? i already have the internal and was about to pull them out. :)
Ando
Have
"07 Mazda BT-50
Offset rims, tints + UHF
Had
"96 Coil Sprung Sierra
31s on Offset 15x7s
2" spring lift + 2" BL
Top
Posts: 4
Joined: Sun Jun 26, 2005 7:17 am

Post by Nutta »

Hi , while on the subject of universals-- How does one change the universals on a 410 ? , I cant see any clips so I guess they must be internal.
Top
Posts: 378
Joined: Tue Nov 02, 2004 8:54 pm
Location: blue mountians

Post by superzuki »

bazooked wrote:
stay away from gmb unis u get wat u pay for.


yes very.

all my $25 unis failed fast

all my $35 toyo unis are still fine

I go to bearing wholesalers in bayswater down road from cheezy racing.

christover
i bought a GMB bout 2 weeks ago....in what way did they fail?? will they be ok iff i keep up the grease and chech them??
Top
Posts: 526
Joined: Tue Aug 24, 2004 2:22 am
Location: Sydney

Post by Podge »

superzuki wrote:
bazooked wrote:
stay away from gmb unis u get wat u pay for.


yes very.

all my $25 unis failed fast

all my $35 toyo unis are still fine

I go to bearing wholesalers in bayswater down road from cheezy racing.

christover
i bought a GMB bout 2 weeks ago....in what way did they fail?? will they be ok iff i keep up the grease and chech them??
It's just a quality thing, some manufacturers take shortcuts in their production techniques of which you won't be able to do to much about.
http://stores.shop.ebay.com.au/4wd-products
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 79 guests