Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

diff lock and 1 axle

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

diff lock and 1 axle

Post by bad_religion_au »

ok it'l be acouple of weeks till i can get my spare freewheeling hub and cv, so i was wondering, is there any harm/ will it work, if i transfer my detroit locker to the front, and use my open center in the rear of my 40 so i still have front wheel drive (to the axle that's still there)?
Spit my last breath
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

I have heard of detroits breaking when driven with only one axle.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

Seems a lot of stuffing around to get a car running for a week or so.
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

only drama i can see is that if you're doin that so u can go 'wheeling' you'd put more stress on the CV's and may blow up the one thats got all the drive to at the front.

but if you're not wheeling.. then why?
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

From pirate...
Ive seen to many detroits break when an axle breaks.
Yea detroits are nice till you break a inner shaft up front and you are blessed with a $500 paperwieght that used to be a detroit.
I was a die hard Detroit fan, had them front and rear on my dd/trail vehicle for a few years and loved them. Then I finally broke an inner and it wasted the locker.
http://www.pirate4x4.com/forum/showthread.php?t=365474
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

thank you all

it's been emotional :D

nah thanks for that, good thing i asked first hey

it's going to be more than aweek before i get a CV. and yes it will be wheeling.

guess i'm out of action :( it seems to be all i do lately is wheel i won't know what else to do... maybe some preventative maintanence :D

anyone know why they break?
Spit my last breath
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

bad_religion_au wrote:
it's going to be more than aweek before i get a CV
pfft give don kyatt's a ring, you can get one delivered for about a hundred bucks.
Free air locker to the first 20 callers!
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

pity your not closer i have a spare pair, i coulda sold ya for well under 100.
there was a pair off a 55series on ebay for $5.
they were still there yesty!
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

DIRTY ROCK STAR wrote:pity your not closer i have a spare pair, i coulda sold ya for well under 100.
there was a pair off a 55series on ebay for $5.
they were still there yesty!
100 bucks is too expensive for me, that's the difference between eating and not for a week

the ones on ebay, a mate of mine just bought, so i couldn't grab them from under him

plus i wasn't going to spend a hunge on a cv when i've got a set sitting in melbourne waiting for me.
Spit my last breath
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests