Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Patrol GQ Gearbox bit notchy???

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 38
Joined: Mon Aug 30, 2004 3:27 pm
Location: sunshine coast

Post by extra niss »

i was having problems with box going into 1st and rev when stopped and it was notching when cold. i worked out that my pressure plate was dragging so the box was still turning over when the clutch is in. so i left till it warn out when i put a clutch kit in it then it 10 times nicer to drive hot and cold.
apparenty it is a big problem in GQ
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

extra niss wrote:i was having problems with box going into 1st and rev when stopped and it was notching when cold. i worked out that my pressure plate was dragging so the box was still turning over when the clutch is in. so i left till it warn out when i put a clutch kit in it then it 10 times nicer to drive hot and cold.
apparenty it is a big problem in GQ
This is kind of the problem Im guessing I could be having :?

My clutch was replaced not that long ago. Could that still be a problem I would have ? How can I tell and what can I do about it ?

Would this have anything to do with a 'whirring' noise I have when in neutral with my foot off the clutch? This noise disappears when I depress the clutch pedal.
Top
Posts: 38
Joined: Mon Aug 30, 2004 3:27 pm
Location: sunshine coast

Post by extra niss »

the wirring noise sounds like it is internal in the box. did they replace the spingot bear when they did the clutch cos that can cause the same thing
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

The bearing was replaced when the clutch was done.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests