Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sway Bar Disconects...1 or 2

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 407
Joined: Wed Aug 20, 2003 10:02 am
Location: Hornsby Sydney

Sway Bar Disconects...1 or 2

Post by Surfin Alec »

Is it neccesary to use 2 sway bar disconnects per end or will 1 do?

I currently remove both sides, and the sway bar hits and rattles around on the control arms and springs and makes a racket.

Will the flex be the same with only 1 side disconnected?

Cheers,

Alec
GO the 80...The mods have started :-)
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

ramp it and see. I'd say one side will give you 99.999% of the articulation of disconnecting both sides.
Free air locker to the first 20 callers!
Top
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

Post by Wooders »

Depends on how much travel you get.
On most modded Jeeps the swayabr serverly limits the wheel travel - even just one side connected......
Thet your also not getting even wheel travel which is something I'm a stickler for ;)
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Posts: 406
Joined: Fri Mar 05, 2004 7:13 pm
Location: Gladstone

Post by crokie83 »

Alec
on my surf, if i only disconnect one side it ends up hitting the chassis and it does limit travel
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests