Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bundy Gearbox swap

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 89
Joined: Fri Jul 15, 2005 9:01 am

Bundy Gearbox swap

Post by Bundy_Harry »

Howdy all,

I have an RJ70 Bundera soft top receiving a ground up rebuild. Vehicle is getting a 22RE heart transplant. Gearbox will be swapped (POS G52) out for an R150R from LJ70. My question is

Will the R150R from the diesel bolt up the the split transfer currently mated to the G52?

Thanx in advance
Bundy_harry
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

pretty sure you will also need the intermediate shaft and transfer input gear as a minimum. would be cheaper and easier to get the R151F with transfer complete. that said, a R151F is overkill for a 22R.
Free air locker to the first 20 callers!
Top
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

My LJ70 was fitted originaly with a G40 and 2L engine. Now has 2L and R151 gearbox, as far I know..G40 out, R151 in.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest