Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

coil rate

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

coil rate

Post by Rhett »

I worked standard serria coils out to be bout 84 lb/in Is this some where near right or do I have my measurments wrong?
Its a wheelbase thing
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Re: coil rate

Post by Damo »

Rhett wrote:I worked standard serria coils out to be bout 84 lb/in Is this some where near right or do I have my measurments wrong?
Sounds way soft to me. My Kings coils are 150lb/in (from memory) and they are pretty soft.

Hang on, maybe mine are 175... can't remember exactly, but 84 sounds way soft.
Top
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Contact:
Contact mud4b

Post by mud4b »

i think it sounds close.

looking at the coils they use 9mm wire and 8 turns, and measure 290mm.


the coils on the rear of yours damo and the mud4b have thicker wire and more turns and length..


rhett youve been reading petersons....
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Top
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

equation I used-

11 250 000(torsional modules for steel) x coil spring wire dia.(inches) to the power of 4
___________________________________________________
8 (consant)X number of active coils x mean(average) coil dia (inches)to the power of 3


This is a standard serria coil

11250000x.36 to the power of 4
____________________________
8x 7 x 3.28 to the power of 3




I think my maths were right.
Its a wheelbase thing
Top
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

I have some other springs worked out with 11 mm wire and 75mm dia they are 151 lb- inch
Its a wheelbase thing
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Yeah I just remembered the coils on mine are inboard further than a stock coily, so that'll make them "appear softer".
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

84 sounds way to soft :shock:

i think most kits in the states run 175
150 has to much body roll
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

Damo wrote:Yeah I just remembered the coils on mine are inboard further than a stock coily, so that'll make them "appear softer".

do you get alot of body roll?
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 7954
Joined: Fri Sep 05, 2003 5:43 pm
Location: Tasmania

Post by DeWsE »

RB zook wrote:
Damo wrote:Yeah I just remembered the coils on mine are inboard further than a stock coily, so that'll make them "appear softer".

do you get alot of body roll?
Has he ever driven it?
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

RB zook wrote: do you get alot of body roll?
Yep
DeWsE wrote: Has he ever driven it?
Yep
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest