Are you just trying to scare Guts ? or is this realBitsamissin wrote:Well if Guts is doing it then I'm in
Should have the supercharged Mitsi 3.5 DOHC multi-valve creature donk in by then so I can blow that white Hilux away
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Supercharged 3.5 DOHC mutli-valve creature donk !?!?
Moderator: -Scott-
Supercharged 3.5 DOHC mutli-valve creature donk !?!?
Frank ??
wtf is an acronym
[color=yellow]Ctrl + W[/color]
[color=yellow]Ctrl + W[/color]
Just farken with his mind man 
But a conversion is definitely on the cards, as long as the 3.0 stays together I'll finish off all the other mods and little things that need to be done.
If the 3.0 suddenly craps itself or when I go up to 35 Pede's and find it's too much then power will be top priority. Most likely a 3.5 SOHC using the larger t/case with 3.15 gears and some massaging. Too much power and things break, wait till you see the things that Lux is gonna bust now
But a conversion is definitely on the cards, as long as the 3.0 stays together I'll finish off all the other mods and little things that need to be done.
If the 3.0 suddenly craps itself or when I go up to 35 Pede's and find it's too much then power will be top priority. Most likely a 3.5 SOHC using the larger t/case with 3.15 gears and some massaging. Too much power and things break, wait till you see the things that Lux is gonna bust now
I just luv my "clacker Jabber"
Yes Ian, we have started fitting the manual set.
So far the casting boss needs to be relieved to fit the new (larger low range gear). The boss is for the 5sp selector rail location which is just above the low range gear. It's there in the auto as well but not used but will still need to be ground back flush to the housing.
We will know tomorrow if the rest of it all fits together then I'll ring Mark to start a production run.
But boy are those gears big
So far the casting boss needs to be relieved to fit the new (larger low range gear). The boss is for the 5sp selector rail location which is just above the low range gear. It's there in the auto as well but not used but will still need to be ground back flush to the housing.
We will know tomorrow if the rest of it all fits together then I'll ring Mark to start a production run.
But boy are those gears big
I just luv my "clacker Jabber"
ok thanks mate,
BTW saw the post on the Paj ute,
Funny enough I am looking seriously at getting my NL converted to a dual cab traytop . There is a guy near Sydney way who does this sort of thing. Went & saw him, he was doing a conversion to a Toyo 100. Excellent job, to get a decent tray top with the dual cab I would need to extend the whellbase by about 500mm. This is the only thing that I am not happy about.
cheers
BTW saw the post on the Paj ute,
Funny enough I am looking seriously at getting my NL converted to a dual cab traytop . There is a guy near Sydney way who does this sort of thing. Went & saw him, he was doing a conversion to a Toyo 100. Excellent job, to get a decent tray top with the dual cab I would need to extend the whellbase by about 500mm. This is the only thing that I am not happy about.
cheers
NL 3.5l auto with front & rear lockers,winch, custom 3.15 T/C gears
Who is online
Users browsing this forum: No registered users and 0 guests