Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What does a 3.5l weigh wet

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

What does a 3.5l weigh wet

Post by 6.5 rangie »

hey guys i'm new to this but can any body tell me what a 3.5l rover motor weighs wet, my 83 runs a 6.5 chev deisel and i need to know the weight difference so i can get the right springs. at the moment it runs 220's front, 270's rear with f&r bars and winch. lets see if the driveline will hold up. damien
Damien


--------------------------------------------------------
Top
Posts: 27
Joined: Mon Jun 27, 2005 2:05 pm
Location: Melbourne

Post by igould »

Probably someone here can tell you, but if no luck, try at http://www.aulro.com/modules.php?name=Forums
This place is populated by rabid Land Rover owners.

Cheers,
Ian
77 Rangie Classic 4.4v8 manual, 2" spring lift, 2" body lift
97 Disco 3.9v8 manual
00 Disco Td5 auto
Top
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

courtesy of http://www.rpiv8.com/engine-4.htm
Dimensions of the Rover V8 engine fully dressed, and weighing in at 230KG all up below.
You do not have the required permissions to view the files attached to this post.
Warn - Dont leave home without it
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

3.5: 144 Kg
3.9: 152 Kg
4.2: 180 Kg
4.6:
308:v218 Kg
HSV 215: 218 Kg
LS1: 185 Kg

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

so is it 144kg or 230kg as that is a big difference, mine weighs (6.5 chev) 330kg approx :?:
Damien


--------------------------------------------------------
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

I would say 230 fully dressed.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

Not sure, if any one has one lying around and want to do a little science experiment we could probably get close by using the information we already have. Assume one man can reasonably lift 80 kg (remember to use correct lifting technique so as not to injure yourself) , then if 2 men can pick it (and you dont have to lift it to bench height) it would be around 140 - 160kg. If it needs 3 men to reasonably lift it then it will be closer to 230kg. :?
Warn - Dont leave home without it
Top
Posts: 490
Joined: Sat Oct 30, 2004 3:44 pm
Location: Sydney

Post by Philip A »

yeah, I think bare ie no ancilliaries like starter motor, alternator, inlet manifold it is about 160KG. Buggered if I know why a 4.2 would be heavier than a 3.9. They are exactly the same. Must be the crank counterweights weigh more!!!!
regards Philip A
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 3 guests