Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Miniture Buggy's

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 337
Joined: Tue Jan 18, 2005 10:16 pm
Location: Gympie

Miniture Buggy's

Post by small talk »

Just wanted to know if anyone has built a mini buggy? kid sized. super compact! Maybe a bit dangerous for kids but small adults would have a ball :D
What i was thinking:

* either swb sierra chassis or custom built
* SPOA super flat springs
* sierra NT or WT diffs which ever is cheapest at the time
* running 30's 31's on flipped rims
* welded front and rear diffs

Now what i want to know is how small can this be, whats the shortest setup:
* 1L engine 4speed Gbox 1L transfer
* 1.3L enigne 5speed gbox 1.3l transfer
* or a combination of any
The reason for short chassis lenght is because it would be running 30-31's due to its rather weak diffs.
Also how narrow can the chassis rails be in regards to the steering??

Brock.
You do not have the required permissions to view the files attached to this post.
Last edited by small talk on Sat Jul 30, 2005 6:06 pm, edited 2 times in total.
1984 Hilux dualcab.
Top
Posts: 337
Joined: Tue Jan 18, 2005 10:16 pm
Location: Gympie

Post by small talk »

Also with the mounting of the engine Gbox and X-fer so far forward out of reach of driver just make short shifters and leave it in 1st and low 4, has anyone done this or seen somthing like it done??

Brock.
1984 Hilux dualcab.
Top
Posts: 4583
Joined: Fri Jun 11, 2004 5:57 pm
Location: Wheeling in my backyard

Post by sierrajim »

A guy on pirate did a similar thing. Think he used a smaller than normal engine, maybe a motorbike engine. Basically a 4wd go cart.

Why not buy a rusted out 1.0ltr Sierra and toobe it.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Top
Posts: 337
Joined: Tue Jan 18, 2005 10:16 pm
Location: Gympie

Post by small talk »

Yeah thats probably the best idea, Just a tiny thing running tyres that wont require larger difs or gearing, then minimise everything possible, is it possible to shorten the shaft between the gearbox and the X-fer?? purly offroad so it doesnt have to drive at speeds. Got a link to the one on pirate??

Brock.
1984 Hilux dualcab.
Top
Posts: 654
Joined: Mon Oct 27, 2003 1:24 pm
Location: singleton

Post by CHOPZUKI »

check this one its frikkin awesome :cool:


http://www.pirate4x4.com/forum/showthread.php?t=376565
DRIVE IT!!!!!
Top
Posts: 654
Joined: Mon Oct 27, 2003 1:24 pm
Location: singleton

Post by CHOPZUKI »

check this one its frikkin awesome :cool:


http://www.pirate4x4.com/forum/showthread.php?t=376565
DRIVE IT!!!!!
Top
Posts: 270
Joined: Fri Apr 09, 2004 1:49 pm
Location: tweed heads

Post by ranover »

sick :twisted:

was thinkin the same thing my son is 10 months old but would love to make sothing for him like that when he gets bigger. thought of makin a mini mini buggy for when hes 2. using a electric motor.

anyway sick idea
Top
Posts: 337
Joined: Tue Jan 18, 2005 10:16 pm
Location: Gympie

Post by small talk »

Thats cool wish someone would just do it all for me too :D could be a new craze like the pit bikes these are pit buggy's. ill be looking to start somthing like this after ive got mine on the road.

Brock.
1984 Hilux dualcab.
Top
Posts: 270
Joined: Fri Apr 09, 2004 1:49 pm
Location: tweed heads

Post by ranover »

yeah

for sure they made those mini hot rods as well. do you know how they made them what motor they used

would be sick to have full diffs locked roll cage would be envy of all the kids on the block. better then those shitty plastic electric cars

dan
Top
Posts: 616
Joined: Tue Mar 29, 2005 6:56 pm
Location: Gympie

Post by Zookified »

It would drive straight over the top of the plastic cars, monster truck style :rofl:
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

project 'yes dear' is also very cool
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

Thats pretty cool but that's far too much weight for a little Honda 300cc engine to push. The weight of those diffs would be more than a whole duadbike.

No reason why the old oddysey style rollcage couldnt be combined with a 4wd quadbike setup though.

I dunno about you guys but a 4x4 type setup with one of these should keep using ATV tyres but just go bigger.

http://www.yamaha-motor.com/sport/produ ... specs.aspx

Stock ground clearance on a Wolverine 350/450 is 8.7" or 220mm - roughly the same ground clearance as a patrol anyway on 23" tyres.

You can get ATV Super Swamper :cool: Vampires up to 28" so that's about 285mm clearance.

That should be plenty of fun for the kids - and the adults too.
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

Here's a couple of the aussie spec ones.

750cc in an ATV.... wooohoooo!

Of course a 350cc workhorse thats an ex council thing should be heaps of power for the kids.

http://www.kawasaki.com.au/au/all_produ ... 0/main.htm

http://www.kawasaki.com.au/au/all_produ ... 0/main.htm

http://www.hondamotorcycles.com.au/moto ... +fa+05.htm
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Post by Beastmavster »

http://www.yamaha-motor.com.au/motor/in ... ?motor.asp

Mmmm.... difflock and front LSD + 275mm ground clearance? Tasty...

[quote]• Liquid-cooled, 660cc 5-valve engine
• Electric starting with recoil backup
• “On-Commandâ€
Top
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

ranover wrote:sick :twisted:

was thinkin the same thing my son is 10 months old but would love to make sothing for him like that when he gets bigger. thought of makin a mini mini buggy for when hes 2. using a electric motor.

anyway sick idea
We won't have any fuel left by then :cry:
you will be buying a flux capacitor kit from Jaycar and building him a anti gravity hover-crawler :cool:
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Top
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

http://www.pirate4x4.com/forum/showthread.php?t=349757

mq diffs should be ok for this as well i'd imagine
Top
Posts: 6314
Joined: Wed Jun 18, 2003 9:49 am
Location: Newcastle, NSW

Contact:
Contact Hekta

Post by Hekta »

Here's a build up thread from Pirate. This guys is building a little jeep for his 7 yr old. :cool:

http://www.pirate4x4.com/forum/showthread.php?t=376565
wtf is an acronym

[color=yellow]Ctrl + W[/color]
Top
Posts: 270
Joined: Fri Apr 09, 2004 1:49 pm
Location: tweed heads

Post by ranover »

seen that one on pirate thats going to be extreme. i was thinkin half scale crawler have to put my thinkin cap on for this one. if i had the cash i would get a 4by and miniture all the bits (tell me im dreamin).

but the atv idea sounds good all set up just build the body and away he goes this is going to be fun
Top
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

Post by flyinwall »

now i know what to do with my left over 1lt gear (motor g/box diffs) now has anyone got a spare t/case
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Top
Posts: 26
Joined: Sun Oct 27, 2002 8:59 pm
Location: Deeral Qld

Post by Mungrel Breed »

i woz thinkn of a 2strke suzi wit a 1500 goldwing or simla sumthin wit shaft drive&reverse. then its an ezi jack shaft convert to xcase
Always out numbered never out gunned!!!
Top
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

Post by flyinwall »

you might want to check this custom miniture buggie out
http://monstermadness.ipbhost.com/index ... wtopic=265
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Top
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

flyinwall wrote:you might want to check this custom miniture buggie out
http://monstermadness.ipbhost.com/index ... wtopic=265
Wow.
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Top
Posts: 270
Joined: Fri Apr 09, 2004 1:49 pm
Location: tweed heads

Post by ranover »

droopypete wrote:
flyinwall wrote:you might want to check this custom miniture buggie out
http://monstermadness.ipbhost.com/index ... wtopic=265
Wow.
now thats sweet.

i guess i could cut the diffs of a zook or something down and play with the rest.

sorry i know ive hijacked this post
Top
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

Post by flyinwall »

its not bad when you consider that he has built the entire thing from scratch right down to the diffs and diff gears
here is a supercharger that he has also built
http://home.hetnet.nl/~cyril-wichers/im ... -int-2.jpg

and here is what the supercharger sits on
http://home.wanadoo.nl/harry.vink/foto/ ... %20020.jpg
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 14 guests