Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Price on a Thermo fan
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Im here for the sausage!
Price on a Thermo fan
Out of curiosity whats a 12inch Davis Craig, or other reputable brand of thermo fan worth? and brand suggestions?
and whats everyones thoughts on what side of the radiator is most beneficial?
looking at maybe keepign engine fan and putting a thermo on the front?
still running standard 2F.
And if i got one that was designed to drawing air and be positioned on the back of the radiator, any downsides to flipping it and putting it upfront?
cheers
Tony
and whats everyones thoughts on what side of the radiator is most beneficial?
looking at maybe keepign engine fan and putting a thermo on the front?
still running standard 2F.
And if i got one that was designed to drawing air and be positioned on the back of the radiator, any downsides to flipping it and putting it upfront?
cheers
Tony
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
www.lovells.com.au
RAW4x4
You would probably find a 12" thermo is not big enough for a cruiser radiator. I had one on my hilux with cruiser radiator and it didnt cover enough area and wasnt up to the cooling task. I bought a 14 " off ebat for around $70 brand new, wasnt a davies craig though, they are fairly expensive. A mate of mine has just put a 307 in his 45 and he used a v6 commo thermo and shroud and it works well and looks the part as well, not sure if you would have enough room with the 6 though.
most thermos these days u can take the blade off and flip it around and run it either way u want.....
u can also switch the wires around the other way, reverse the polarity of the motor for your purpose....
with price it depends on brand and quality, but a 12inch would probably do very little to help u in all honesty.....
but id say around the $100 to $150 mark for a good one.
screwy
u can also switch the wires around the other way, reverse the polarity of the motor for your purpose....
with price it depends on brand and quality, but a 12inch would probably do very little to help u in all honesty.....
but id say around the $100 to $150 mark for a good one.
screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
gday bud, i run a v8 in my lux and use two 10" davies craig thermos, one in the top left corner one on bottom right corner, this works well... fans were 90 buckes each from bursons, think 12" onews were bout 110 each...
dont toouch the brand ice... i had a sixteen " fan from them it shat itself.. clean snapped the pins that spinb the blades....
cheers hope this helps
dont toouch the brand ice... i had a sixteen " fan from them it shat itself.. clean snapped the pins that spinb the blades....
cheers hope this helps
ours is not to ask why, but to do or die!
https://www.americanautos.com.au/secure.html
This mob sell them and list the prices somewhere on their site. My local auto parts store sells the 16" one for 299. With 12" you would probably be best to use two.
This mob sell them and list the prices somewhere on their site. My local auto parts store sells the 16" one for 299. With 12" you would probably be best to use two.
dont put it in front as it just restricts air. been there b4 and it did less than a stock fixed fan without a shroud. make sure you use a propper temp switch so ya dont forget to switch it on but install a manual switch so ya can turn it off for water crossings.
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Lots of custom gear as I cant afford the proper stuff.
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Twon, ask me tomorrow at soccer and i will give you some ideas and start workin on it. Bring the 40 if ya want and we will work out the best idea.
Layto....
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Temporary Australian
But are they Davies Craig Fans or not...? That is what he is asking about mainly...RoeDao wrote:you can buy 16" fans on ebay for $160 and they work ok...... i have one on mine and it works and cools nicely
I mean, all comments are welcome, but DC are his preferred type...
My 16" DC was just under $300 and it works a treat... I am yet to get the skinny's on it and work it hard at a burnout comp, but that should be happening soon.
I'll let you know how it goes at 5000 RPM for sustained periods of time...
Meldge...
86' Landcruiser - MWB Soft Top
Kustom, Kustom and more Kustom to Kome,
Store bought is not as fun...
[quote="Meldge"]Not too long, not to short, it's Middy - It's Just right... :armsup:[/quote]
86' Landcruiser - MWB Soft Top
Kustom, Kustom and more Kustom to Kome,
Store bought is not as fun...
[quote="Meldge"]Not too long, not to short, it's Middy - It's Just right... :armsup:[/quote]
Who is online
Users browsing this forum: No registered users and 138 guests