Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tyre Advice?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 38
Joined: Tue Nov 16, 2004 12:48 pm

Tyre Advice?

Post by matt g »

Hi Folks,

I'm looking for 31" tyres to go on my jimny. They'll do the vast majority of their driving onroad, so longevity on bitumen is really important.

I've looked at BF Goodrich All Terrains, and been quoted $310 each by ARB on rims, installed, balanced etc.

Does that sound any good?

My friend has a smaller diameter set on his jimny, has gotten about 80,000km out of them, and thinks theyre about 1/2 done

Can anyone offer perhaps some alternative options, or experience with them?

Thanks
Matt,
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

My first "big" set of tyres were a set of 33" BFG all terains (man those puppys were HUGE :lol: ) I was wrapped in them, moved on to a set of BFG muds and was even happier, a bit noisier and a faster wearing (not much)
As a road/off road tyre A/T's are good, but fresh muds aren't far behind them, as muds wear (past 50%) they start to get load and wander a bit its not huge but it is noticable.
I supose it depends what type of "off road" driving you do.
Peter.
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Posts: 12
Joined: Tue Jun 28, 2005 4:11 pm
Location: Melbourne

Post by fustercluck40 »

G'day

$310.00 sounds a bit steep.

I have pruchased my tyres from the Tyre Factory BFG M/T 225/75/R16 for $220.00 per corner about 1.5 years ago. I do not think they have increased in price that much..

I am sure the 31" would be a more common size, so you would think would be slightly cheaper.

I have a 99 GV and have done 40,000 Kms on these and they still have about 3/4 tread.. As the Jimmny is lighter,I am sure the tyre ware will be better again.

Have a look at the Coopers also.. The ST or STT series.
Anyway, that is m y 2 cents worth.
Posts: 1142
Joined: Fri Feb 18, 2005 6:25 pm
Location: brisbane

Post by largesuzy »

fustercluck40 wrote:G'day

$310.00 sounds a bit steep.

I have pruchased my tyres from the Tyre Factory BFG M/T 225/75/R16 for $220.00 per corner about 1.5 years ago. I do not think they have increased in price that much..

I am sure the 31" would be a more common size, so you would think would be slightly cheaper.

I have a 99 GV and have done 40,000 Kms on these and they still have about 3/4 tread.. As the Jimmny is lighter,I am sure the tyre ware will be better again.

Have a look at the Coopers also.. The ST or STT series.
Anyway, that is m y 2 cents worth.
please do not buy coopers the lugs just tear off
89 lux 2bl 4inch spring 35's etc still slow as a snail
Posts: 38
Joined: Tue Nov 16, 2004 12:48 pm

Post by matt g »

Hey Everyone,

Fuster, that price of $310 is for the tyre and the wheel - white steel things. The wheels seem to be around $50-60 each.

So it was about $250-260 for each tyre. Does that still sound high?

Cheers
Matt
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

I've found the the Simex Centipede Radial MT (not ET's) to be pretty good value. They only come in a 31x10.5 and are wearing well on a lwb Vit and @ $150 ea. They are more aggressive than an AT but fine on the road even in the wet (not too noisy either) and better offroad than an AT. I wouldn't bother with AT's if I was going to use it offroad. Just another option.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Posts: 56
Joined: Tue Oct 19, 2004 7:35 pm
Location: Brisbane

Tyre Advice

Post by suzyted »

I sell whels and tyres for a living and be careful on wheels that are wide enough to take a 31 and the correct off set to fit under your guards. you need a negative ( -12 )offset wheel to clear the tie rod end at the back of the wheel .this leaves you no room to put 10.5 inch tyres on.check the tyre clears the inner guards when on full lock and articulation. they might have the right combo but i havent seen it yet.
Posts: 343
Joined: Fri Nov 05, 2004 11:53 pm
Location: Mt Gambier SA

Post by -ZukChiK- »

largesuzy wrote: please do not buy coopers the lugs just tear off
Hey largesuzy,

I'm tossing up whether to get STT's next (Armor Tech) or bigger BFG Muds, which I'm tending towards since I love the (baby-sized) BFG Muds I have on at the moment. Having just read your post, what type of Cooper's are you referring to? and what kind of terrain tore the lugs off? (do you mean they tore off easily under the same conditions where, say, a Mud would stand up to the punishment without as much carnage?) I'm worried the rubber may be softer on the Cooper STT's.... But damn they look sexy!!!

matt g , I got quoted earlier this year $170 for BFG mud terrains, which I think is damn cheap... Give Widetread a call in melbourne

Laterz
[url=http://www.oceanculture.com]Ocean Culture Sandboards & Gear[/url]
Posts: 12
Joined: Tue Jun 28, 2005 4:11 pm
Location: Melbourne

Post by fustercluck40 »

Suzuki Surf Chik wrote:
largesuzy wrote:
matt g , I got quoted earlier this year $170 for BFG mud terrains, which I think is damn cheap... Give Widetread a call in melbourne

Laterz
I think $170.00 is a very good price.. I was think about the BFG or Coopers.. The BFG were about $30.00 cheaper.

2 Years ago I think I payed $220.00 (Fitted & Balanced) per corner for the BFG 225/75 R16 M/T's
And that was a good price back then.
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

cj wrote:I've found the the Simex Centipede Radial MT (not ET's) to be pretty good value. They only come in a 31x10.5 and are wearing well on a lwb Vit and @ $150 ea. They are more aggressive than an AT but fine on the road even in the wet (not too noisy either) and better offroad than an AT. I wouldn't bother with AT's if I was going to use it offroad. Just another option.
What cj said..........I have them on a daily driver too. Very good traction on/off road in about 80-90% of conditions.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Posts: 38
Joined: Tue Nov 16, 2004 12:48 pm

Post by matt g »

Hey all,

Well today after calling two places roughly the same distance from home as ARB, I was quoted $220 per tyre, and $50 per wheel fitted and balanced for the same 31" BF Goodrich All Terrains.

Is that sounding better? $1350 for all 5.

Thanks

Matt
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

Where are you? because tyre prices seem to vary from state to state. Also sometimes it pays to drive to the other side of the city you live in as some places are cheaper and give discounts for club members or even if you mention you are on this board
Ransom note = demand + collage
Posts: 38
Joined: Tue Nov 16, 2004 12:48 pm

Post by matt g »

Hey Grimbo,

I'm based in the inner west of sydney - but im happy to drive a bit :)

cheers
matt
Posts: 126
Joined: Sat Feb 26, 2005 7:46 pm
Location: Melbourne

Post by 87suzi »

Just a little piece of information which I found out recently, and I find quite disturbing. In victoria, you can't go a tyre any wider than 15mm more than what the original tyre was, and can't increase the width of the rim by more than an inch. I'm out in both ways, I hear it's illegal to scratch your ass.
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

You can get an engineer to approve much larger than that in vic - 30-31 ona sierra no problem

If you were in QLD looking to do the same I'd say you're screwed.

heaps of vic ppl running that size legally. Check out the vic suzy club website and head to a meeting they'll point you to an engineer who can make 31"s legal on your rig.
Post Reply

Who is online

Users browsing this forum: No registered users and 61 guests