Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
how many teeth supposed to be on a pinion teeth (on the starter of a samurai ?
one manuel said 6 another 8 .
i do have problems with starting .
thank you all
yitschak
eight teeth on my two spares what starting problem have you got with it ?
i know a lot of people tend to change there starters from clicking and not engaging , i had these problems and i was getting the full 12v to the starter , i just pulled it apart cleaned the armature and linkages n and put a little slit in the side of the back of the solenoid so i could clean the terminal mating surfaces etc and then put them back to gether , and they go like new ,
cheers Jai
if its worth doing do it intensly , better still do it with MADPASSION