Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

number of pinion teeth

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 3
Joined: Sat Aug 06, 2005 11:03 pm

number of pinion teeth

Post by yitschak »

how many teeth supposed to be on a pinion teeth (on the starter of a samurai ? :oops:
one manuel said 6 another 8 .
i do have problems with starting .
thank you all :roll:
yitschak
Posts: 775
Joined: Tue Mar 18, 2003 8:10 pm
Location: under the wifes thumb

Post by zookjedi »

eight teeth on my two spares what starting problem have you got with it ?
i know a lot of people tend to change there starters from clicking and not engaging , i had these problems and i was getting the full 12v to the starter , i just pulled it apart cleaned the armature and linkages n and put a little slit in the side of the back of the solenoid so i could clean the terminal mating surfaces etc and then put them back to gether , and they go like new ,

cheers Jai
if its worth doing do it intensly , better still do it with MADPASSION

set your limits way beyond your abilities
Posts: 4225
Joined: Tue Jun 17, 2003 8:58 pm
Location: sunshine coast australia

Post by mud4b »

you can also use a vitara 1.6 efi starter for hi torque..

these can be found fairly easy and sometimes cheaper than a sierra unit..

they are better sealed than the sierra starter also.. :armsup:
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Post Reply

Who is online

Users browsing this forum: No registered users and 73 guests