Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
mongrels and simex tubes PSI
mongrels and simex tubes PSI
hey guys what PSI have people been running mongrels at (with tubes in) without losing a bead?
My Sierra has got 32" Mongrels with tubes front and tubeless rear ..normally run 10 offroad, but have recently been running 8...will probably run less after power steer.
I got frequent bead leaks on front, (different carcass brand to rear) hence the tubes in da front. But never lost the bead, even when almost flat.
Will probably tube the rear if I happy.
christover
I got frequent bead leaks on front, (different carcass brand to rear) hence the tubes in da front. But never lost the bead, even when almost flat.
Will probably tube the rear if I happy.
christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
http://www.vic.suzuki4wd.com/forum/
Who is online
Users browsing this forum: No registered users and 3 guests