Could any one tell me if they have used modified Range Rover or Discovery Prop Shafts in place of the double cardan arrangement on the front of a Stage 1 Series 3. I have a Range Rover rear prop shaft that I can shorten an d the LT95 flange so it will all fit but I am reluctant to go to the trouble of modifying it all if it will end up falling out at 120 kph. Rover while they have done some really stupid things over the years used the double cardan arrangement for a reason I guess.
Has anyone had first hand experience with this Im not sure whether to replace the shaft with a new standard one or go down this path.
Do the standard ones actually give that much trouble mine seems ok but I just like to be prepared?
Thanks in advance
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Stage 1 front propshaft
Moderator: Micka
I'm just about to try it.
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=51711
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=51711
Cheers
Slunnie
Discovery TD5, Landy IIa V8 ute.
Slunnie
Discovery TD5, Landy IIa V8 ute.
Who is online
Users browsing this forum: No registered users and 1 guest