Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ Heater Fan Switch.
GQ Heater Fan Switch.
My 4 position switch doesn't work on 1,2 or 3 only when on 4. Are there two switches or is it just one unit that's probably buggered. Any clues to a fix would be appreciated or even pointers to an aftermarket solution as the Nissan one is probably made of unobtanium.
Red Mav
If you remove the glove compartment (3 or 4 screws from memory) you will find the heater resistors screwed into a plastic housing. it has a couple of wires pluged in, unplug and remove the 2 screws holding it in place.
this is the part you need to replace, I think nissan charged me around the $40 mark. removiong and fitting takes no more than 15 mins, a very simple fix.
hope this helps you
If you remove the glove compartment (3 or 4 screws from memory) you will find the heater resistors screwed into a plastic housing. it has a couple of wires pluged in, unplug and remove the 2 screws holding it in place.
this is the part you need to replace, I think nissan charged me around the $40 mark. removiong and fitting takes no more than 15 mins, a very simple fix.
hope this helps you
Who is online
Users browsing this forum: No registered users and 3 guests