Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ute conversion

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 201
Joined: Sun Apr 03, 2005 1:36 pm
Location: S/E melbourne

ute conversion

Post by lux kid »

this question is to all you nissan nuts that have cut ya shorties in to utes.
i got my shortie cheap cause the roof was allready cut off.
now i was goen to do the cop to a style side. but the C piller's and rear section are a good 20 mm shorter than just behind the B piller. so im thinken of goen the tray option and lopping the hole back off.
does any now if i can get a panel like the ones ive seen, that people use for daul cab conversions. or even what else i can use to close in the back for either style side or the tray option.
getting HALF CUT ready for mudbash 09.
hold on to your hats boys and girls.
Top
Posts: 3189
Joined: Thu Mar 04, 2004 1:11 pm
Location: Jimboomba

Post by BIG GQ »

Wreckers sell back walls from GU< GQ and MQ. Or you can get them new as well.
Cheers
Linc

[quote="chimpboy"]Punctuation is the difference between 'I helped my Uncle Jack off his horse' and 'I helped my uncle jack off his horse.'[/quote]
Top
Posts: 783
Joined: Sat Jul 09, 2005 6:57 pm
Location: geelong

Post by GQ4.8coilcab »

Yer wat BIG GQ said, a mate got a back wall for $1000. If you can do it your self, you will save heaps.
[color=red][size=150][b]CTRL + W[/b][/size][/color]
Top
Posts: 23
Joined: Mon May 02, 2005 6:44 pm
Location: S.E MELB

Post by dieselSWB »

where do you get these back walls from domn in melbourne
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

wreckers mq ute back i paid $200 for steel $60 for glass
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 1619
Joined: Wed Dec 24, 2003 11:26 pm
Location: Brisbane, Australia

Post by Rainbow Warrior »

bru21 wrote:wreckers mq ute back i paid $200 for steel $60 for glass
Just be careful if you are thinking of using some MQ roof as there's one less rib in MQ roof than GQ
Pat,
Brisbane, Australia,
JK 4door Rubicon, currently 4 Sale :(
It's a Jeep thing, I don't understand........
Top
Posts: 1072
Joined: Thu Jun 17, 2004 4:38 pm
Location: Port Macquarie

...

Post by JemmyBubbles »

What if you were chopping GQ shorty to a Tub back (Just behind the rear passenger footwell).. What would you use to create the ute back/glass ? I don't like the look of the angle when the C?? pillars are matched to the B?? Pillars - I want it to be straight up/down...

Would it have to be a custom back or could a MQ/GQ uterus back be butchered to fit.
[quote="MSCHIF"]SPUA its like shaving a barbie dolls head, amusing but pointless.[/quote]
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 14 guests