Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

dobinson shocks?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 1711
Joined: Mon May 10, 2004 7:19 am
Location: Kalgoorlie WA

dobinson shocks?

Post by roverrat »

Have any of you guys had experience with dobinson shocks?? Are they made by them or rebadged? I was under the impression that there weren't too many shock makers around and 80% of brands are rebadged with different setups etc..

I searched but found little joy on them....

All info Is most URGENTLY required.
We are put on this earth for one thing, and one thing only, to die. What you do in the mean time is entirely up to you!

http://www.outerlimits4x4.com/ftopic52067.php
Posts: 1719
Joined: Sun Jan 25, 2004 11:45 am
Location: Brisbane

Post by RV80 »

www.bolsys.com.au
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

Hi
Dobinsons shocks are made for Dobinsons in a Country in Northern Africa that Dobinsons would like to keep secret for some silly reason. I don't know of any shocks sold in Australia made by the same manufacturer. (so not rebadged). They are really a very decent shock, 2nd to none except maybe Bilstein and Koni.

For a Patrol, Cruiser, Rangie etc Dobinsins have the bigger bore 36mm shocks but for most other vehicles they have a smaller bore shock. For other vehicles I recommend you go for EFS shocks because EFS keep to a bigger 35mm bore as much as the vehicle allows them. (EFS are rebadged Lovells shocks but no harm in that)

So for the bigger 4wd's head for Dobinsons (better valved for the bigger 4wd's) and for smaller one's head for EFS. I can sell you both types delivered to your door for $95 each.

Or you can go for the Procomp shocks for $125 each delivered. I wouldn't say Procomp are a better shock but you can get longer lengths in Procomp and a longer warranty (limited lifetime Warranty).( better than Rancho and tough dog :P )

EFS has a 3 year manufactures warranty and Dobinsons have a 12 month manufactures warranty for shocks but I would warranty them for 3 years as well.

I hope this is the info you are after

Shane on 0409 593 414
4WD STUFF
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

OME, TJM and a few others are all Monroe shocks made to the respective companies specs.
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Post by Beastmavster »

One issue I had with the EFS shocks on the GQ SWB was die to the larger bore size the fronts would not fit until I took to the front of the car with a die grinder. Some people might be a bit put off by that.

Not much of a worry... but there is a reason why some of the others do not offer 35mm bore for all applications. Worth considering.

Other than that been happy with them so far.

In the ranges I went looking for from EFS, GQ specification for 2" and 3" lift is the same front shocks (dunno about 4" ones). There are 3 rear sizes for the GQ rear in this range and you can use the 4" lift shock on the rear on a 2" lift if you can deal with slight rubbage on upward travel (I wanted max travel with no rear swaybar and took my 2" shocks back). They sell it as an extra long 2" but I think it's the same part - it's certainly the same lengths.

Probably the recommended one for 3" would work best on 2" if you want extra flex wihtout the rub.

Same principles apply with any set so if you buy Procomp the stock 2" lift ones are only 2" longer and thus give no more down travel.

As I'd already suggested they may not be long enough these were replaced no questions asked :D

Not that this is a bad thing - but different people have different needs and you need to specify what you're after and why to get the best service.....

I was interested in the procomps but the 6 week wait I was going to face at the time meant I bought EFS that afternoon instead.
Posts: 391
Joined: Tue Oct 26, 2004 6:50 pm
Location: brissy

shocks

Post by benjamin78au »

well i have dobinsons on my zuk with 2 inch suspension lift, and find they are pretty good. have had them on for nearly 4 years and no problems yet with em. maybe they a little harder then i would like but okay.
bj
Posts: 32
Joined: Wed Jun 09, 2004 7:34 pm

Post by Witchdoctor »

Dobinson shocks are all but identicall to the DeCarbon shocks that are made in France. Spoke to them about this they gave me a yes/no answer to DeCarbon suppling.

Dave
Posts: 1711
Joined: Mon May 10, 2004 7:19 am
Location: Kalgoorlie WA

shocks

Post by roverrat »

sweet thanks for the replies
We are put on this earth for one thing, and one thing only, to die. What you do in the mean time is entirely up to you!

http://www.outerlimits4x4.com/ftopic52067.php
Posts: 2853
Joined: Tue Nov 30, 2004 10:55 pm
Location: All over the world or your mum

Post by toughnut »

I'm sponsored by dobinsons and I run them on my GU comp truck. I've smashed them for a year and I've had no trouble with them. The shocks are made in Tunisia in near Egypt and are made to dobinsons specs. I highly recomend them as they are very simple with no adjustment on them. I found that I couldn't really tune adjustable shocks anyway and the dobinsons have suited my needs nicely straight out of the box. ( can I have a new set of shocks now Mr. Dobinson :D ) :rofl:
j-top paj wrote:gayer than jizz on a beard
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Post by Suspension Stuff »

I confirm, Dobinsons shocks are made in Tunisia. They do speak french there and probably owned by the French if the truth be told.
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Post Reply

Who is online

Users browsing this forum: No registered users and 114 guests