Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
urgent g16b help
urgent g16b help
my g16b wont start and i need to get home
it turns over fine, but just wont fire
i've tried the efi diagnostic thing, it flashes 12 which is normal operation
i've cleaned the contacts in the dizzy, it has a good spark, i've pulled the plugs and they seem fine, though they were dry, i thought'd they'd be a little wet from being turned over but it not firing?? could it be a fuel prob?
it did this on saturday, but i left it for 5 mins and it started fine, i've been tryin tonight for 30mins with no luck
what else could it be before i burn the fukin thing to the ground?
it turns over fine, but just wont fire
i've tried the efi diagnostic thing, it flashes 12 which is normal operation
i've cleaned the contacts in the dizzy, it has a good spark, i've pulled the plugs and they seem fine, though they were dry, i thought'd they'd be a little wet from being turned over but it not firing?? could it be a fuel prob?
it did this on saturday, but i left it for 5 mins and it started fine, i've been tryin tonight for 30mins with no luck
what else could it be before i burn the fukin thing to the ground?
The Guys next door to you in the Bike Shop should have an injector Pulse tester. Its just a small globe that is plugged into the wires that goes to the injector. Plug this in and then crank the engine. If the globe doesnt flash then you have no pulse to the injectors. This can also be tested with a multi meter.antt wrote:cheers guys
i've given in, i'm takin one of the work utes home, so i'll sort it out tomorrow after work
Who is online
Users browsing this forum: No registered users and 1 guest