Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Starter motor removal on a BJ74. Thanks Mr Toyota

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 207
Joined: Thu Jun 26, 2003 10:02 pm
Location: sydney

Starter motor removal on a BJ74. Thanks Mr Toyota

Post by turbo4t »

That genious from Japan is at it again.

Here is a submission I have for the BJ74 workshop manual.

Starter motor removal:

1. Using Oxy, remove 30cm of chassis rail adjacent to starter motor.

2. Remove one bolt and one nut holding starter to bell housing. (To gain access to these, first remove body from chassis or simply remove fire wall).

3. Cut starter in 3 piece with oxy.

4. Buy new Toyota 4wd with functional starter motor.
Posts: 541
Joined: Sun Sep 28, 2003 5:04 pm
Location: in the shower..

Post by carts »

Quit your complaining....that doesnt seem all that hard to me.... :roll:
If you want a spare 60 for bits-
http://carl.outerlimits4x4.com/viewtopic.php?p=1109227#1109227
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

classic example of someone not reading hte whole instructions first... if you read them before starting the job, you'd skip all the hard steps and buy yourself a new yota to begin with
Spit my last breath
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

..........talk about doing things the hard way...........lol
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Post by frp88 »

man when mine goes i'll get it done with a fixed price for getting it out and putting it in :D
LETS GO BRONCOS
Posts: 19
Joined: Fri Jul 29, 2005 10:07 pm
Location: Melbourne

Post by MarzBar »

Are you an accountant by any chance????? LOL
Posts: 1284
Joined: Tue Mar 22, 2005 12:31 pm
Location: forest lake BUILDING BOOTYFAB BARWORK

Post by frp88 »

no but have you see were it is Mr tojota is :twisted:
LETS GO BRONCOS
Posts: 207
Joined: Thu Jun 26, 2003 10:02 pm
Location: sydney

Post by turbo4t »

I finally got the sucker out and back in again. Had to undo engine mounts, jack engine up, use about 6 socket extensions, rotate the starter about 10 times and use a pry bar. All that for a 20 minute starter re-build and a $5 contact. Models with no A/C might not be such a problem. All fun and games.
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

turbo4t wrote:I finally got the sucker out and back in again. Had to undo engine mounts, jack engine up, use about 6 socket extensions, rotate the starter about 10 times and use a pry bar. All that for a 20 minute starter re-build and a $5 contact. Models with no A/C might not be such a problem. All fun and games.


hmm I have had starters in and out of BJ70's and 73's a few times, would not have thought the 74 much different. I think they are easier than HJ60 starters, where I have to lie across the top of the air cleaner to get the top bolt in/out.
Free air locker to the first 20 callers!
Posts: 207
Joined: Thu Jun 26, 2003 10:02 pm
Location: sydney

Post by turbo4t »

dumbdunce wrote:
turbo4t wrote:I finally got the sucker out and back in again. Had to undo engine mounts, jack engine up, use about 6 socket extensions, rotate the starter about 10 times and use a pry bar. All that for a 20 minute starter re-build and a $5 contact. Models with no A/C might not be such a problem. All fun and games.


hmm I have had starters in and out of BJ70's and 73's a few times, would not have thought the 74 much different. I think they are easier than HJ60 starters, where I have to lie across the top of the air cleaner to get the top bolt in/out.


Yeah, the 3B's, 2H's, 2/3F's etc are a piece of cake. This one was a real mongrel as there is not enough clearance between the starter and chasiss.
Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests