Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rangie viscous fan

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 11
Joined: Tue Aug 30, 2005 8:58 pm

rangie viscous fan

Post by cyco666 »

after a bit of advice, the viscous fan on my 86 rangie has broken off a blade and while asking around to get a new one have found out it is a common problem, so just wondering if anyone knows if you can remove the fan and run thermo fans instead or does this lead to over heating problems? or any other problems. thanks
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Post by HSV Rangie »

thermos work perfect
ford el.

I beliebve there is a ford viscus fan set up that fits although fand blades are at different pitch. and need to be trimmed 5 mm

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Posts: 425
Joined: Sun Jan 16, 2005 10:42 pm
Location: Melbourne

Post by walker »

I just picked up a brand new AU Falcon twin thermo fan set-up from Ebay for $140. I think the fans were the same from EL-AU adn this is what you want.
They are $250 from a Ford dealer.
Thanks,

Adam
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Post by Maggot4x4 »

walker wrote:I just picked up a brand new AU Falcon twin thermo fan set-up from Ebay for $140. I think the fans were the same from EL-AU adn this is what you want.
They are $250 from a Ford dealer.


Have them (EL) on my rangie with a 4BD1 and on my other rangie (350 chev), $80 from the wrecker and work a treat.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Posts: 268
Joined: Tue Apr 19, 2005 7:00 pm
Location: Brisbane

Post by Rangie ute on 38'' »

i have twim thermos front mounted and no mechaqnical fan so i dont flick water alover the dizzy n electrics, they are out of a french car and are fully rebuildable, they work very effectively.
Posts: 26
Joined: Mon Apr 19, 2004 4:59 pm
Location: Singleton NSW Australia

Post by deRanged Rover »

Electric fans are OK for light general bitumen work.

If you intend to do any serious work of 4wding then they will not cope - if they did then they would be fitted as OEM.

Just look up the fan output specs for electric fans and compare to the original fan specs.
Posts: 51
Joined: Wed Aug 31, 2005 1:53 pm
Location: Emu Plains, NSW, Australia

Post by p38arover »

HSV Rangie wrote:I beliebve there is a ford viscus fan set up that fits although fand blades are at different pitch. and need to be trimmed 5 mm


I had a Ford Falcon steel-bladed fan in my '86 RR.

I think it was out of an XF or similar. The blades had been trimmed.

For a pix of a typical RR plastic fan blade, see a pix I took at http://www.rangerovers.net/repairdetails/coolingsystem/fan.html
Ron
1995 Range Rover 4.6 HSE
2005 Subaru Forester 2.5X
Posts: 11
Joined: Tue Aug 30, 2005 8:58 pm

Post by cyco666 »

thanks every one your advise is much appreciated
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests