Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Who has a sierra trasfer in a Jimny??

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Who has a sierra trasfer in a Jimny??

Post by jtraf »

would like to as a few questions in regards to the conversion
Top
Posts: 396
Joined: Fri Dec 24, 2004 4:05 pm
Location: in the shed cutting/grinding/welding mocks old shit vic

Post by mugginsmoo »

go to www.jimnyworld.com/forum/index.php?

this is a popular topic at the moment :D
[quote="Gwagensteve"]
nope, apparently I hate suzukis so nobody should be surprised by that :roll:

Steve,[/quote]
[url=http://vic.suzuki4wd.com/]Suzuki 4WD club VIC[/url]
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

have a question up there but no answers........doesn't seem to be enough traffic there mitch........
Top
Posts: 396
Joined: Fri Dec 24, 2004 4:05 pm
Location: in the shed cutting/grinding/welding mocks old shit vic

Post by mugginsmoo »

it's not a cheap option, as far as i know you need to shorten your jack shaft & one drive shaft (and change drive shaft flanges), you need to fab mounting arms and a speedo pickup, bla bla bla...
[quote="Gwagensteve"]
nope, apparently I hate suzukis so nobody should be surprised by that :roll:

Steve,[/quote]
[url=http://vic.suzuki4wd.com/]Suzuki 4WD club VIC[/url]
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

only want to know what they did to adapt the VSS from the Jimny case to the sierra case.....
Top
Posts: 56
Joined: Sat Jul 02, 2005 10:10 am
Location: nowra NSW

Post by bozwon »

the answer is there if you are using a jimny vss.

you need to get a ring made that resides on a tailshaft spacer.

the ring must have 25 teeth and the sensor is mounted on a bracket off the TC so it sits just over the ring. i think the sensor needs to be NO MORE THAN 1mm away from the ring or it will not work.

robs member rig post has pics on the second page
http://www.jimnyworld.com/forum/viewtop ... 6&start=15

hope this helps
Top
Posts: 56
Joined: Sat Jul 02, 2005 10:10 am
Location: nowra NSW

Post by bozwon »

mooman wrote:it's not a cheap option, as far as i know you need to shorten your jack shaft & one drive shaft (and change drive shaft flanges), you need to fab mounting arms and a speedo pickup, bla bla bla...
as far as i know one way to do it is to use a sierra shaft for the rear but it has to be lenghtned and the jack shaft must be shortened by 50mm
Top
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

thanks for that.........

just have to figure out where to get the gear made up now...
Top
Posts: 56
Joined: Sat Jul 02, 2005 10:10 am
Location: nowra NSW

Post by bozwon »

any engineering/metal fabrication place should be able 2 help you. if you design it properley you could incorperate it in a drive shaft spacer rather than having it as an add on component. thats what im planning to do
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 3 guests