Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

front hub on mk

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
User avatar
ash
Posts: 103
Joined: Sun Oct 03, 2004 8:57 pm

front hub on mk

Post by ash »

the front left hand hub makes a a strange rattle when its locked and it only does it at 20km or over and when i slow down it goes away
and when i unlock the hub as well and this all happens in two wheel drive as well as 4wd plz help thanks
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

jack the wheel up, try to wobble the wheel up and down.....

mate it sounds like wheel bearings.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 766
Joined: Mon Dec 30, 2002 3:08 pm
Location: Melbourne

Post by jtraf »

35in tyres and 4x4 action see the wheel bearings come lose all the time.

I used to adjust them after every couple of trips to ensure they didn't bugger up to early. Eveb new lock washers wouldn't stop them coming loose enough to cause issues.

Ask Screwy mentioned jack the front left end grab the wheel at 12 and 6 and see if it has any movement and if soo wheel bearings will need to be adjusted......if they are clicking it is time for new bearing as well.....

HTH

James
Posts: 55
Joined: Mon Jan 03, 2005 10:22 pm
Location: Philippines

Post by Mintoy »

if your using auto hubs. the bearings have eaten thru the housing. ul be lookng for new ones soon. same thing happend to me and cud not find the bearings so i went manual hubs.
User avatar
ash
Posts: 103
Joined: Sun Oct 03, 2004 8:57 pm

Post by ash »

yeah already checked wheel bearings and there fine
Posts: 55
Joined: Mon Jan 03, 2005 10:22 pm
Location: Philippines

Post by Mintoy »

when you dissasemble your front axles to replace the bearings. you might as well service the auto hubs as well.
Post Reply

Who is online

Users browsing this forum: No registered users and 27 guests