.... and are they supposed to look like this? i'm talking about the heat marks i think are from the balls.
i dont know much about sierra, this is a mates' sierra. we're pulling the front and rear diffs, and doing the bearings and all new seals.
thanks
Steve
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
just pulled some sierra front axles out.....
just pulled some sierra front axles out.....
You do not have the required permissions to view the files attached to this post.
1995 Vitara:
stock standard
WWW.DARWIN4X4.NET
stock standard
WWW.DARWIN4X4.NET
dasflk;dj;alskj
thanks sam.
i know they are CVs, but i didnt know the heat marks would be normal. i thought maybe it was a lack of grease in the CVs. but what the heck, if its normal, then its normal.
also, do the splines come in 22 AND 26? or not?
i know they are CVs, but i didnt know the heat marks would be normal. i thought maybe it was a lack of grease in the CVs. but what the heck, if its normal, then its normal.
also, do the splines come in 22 AND 26? or not?
1995 Vitara:
stock standard
WWW.DARWIN4X4.NET
stock standard
WWW.DARWIN4X4.NET
Who is online
Users browsing this forum: No registered users and 2 guests