Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 Series Diffs in a SWB Vitara

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

80 Series Diffs in a SWB Vitara

Post by Maggot4x4 »

Does anyone know if you could get this engineered? Would the chassis be strong enough?
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Posts: 356
Joined: Thu Apr 03, 2003 2:55 pm
Location: Canberra

Post by zooker »

Damn dont ya think thats a bit of overkill :shock: Wat do u need diffs that big for??
Posts: 293
Joined: Wed Oct 23, 2002 9:10 am

Post by skippy »

why not go with the usual hilux diff swap? that would be plenty strong enough.

unless you are planning on running 44" boggers or something.


if your'e going 80 series diffs, why not go bigger and put unimog diffs under it?
Skippy


--------------------------------------------------
for all things digital, come to NEWflavour
'a better tasting multimedia experience'

http://www.newflavour.com/
--------------------------------------------------
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Maybe he's already got a pair of 80 series diffs?

I can't see why this couldnt be engineered. The only thing I would be concerned about is the width but i'm thinking it would be reasonably close.

Which state you are in might make a difference. Where r u?
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

how are they for offset, will they line up with transfer case and clear the engine. Anything is possible but I'd imagine it would involve a lot of work and $$$ to get it properly done and engineered. They will be awfully wide for a vitara so there are all the worries about tyre clearance with the body work etc which means a big lift as I imagine the whole point of this is to run big tyres. What are you planning?
Ransom note = demand + collage
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

offset diff centres

Post by Damo »

Good point Grimbo, I didnt think of that one. Cruiser diffs are offset to the drivers side are they not?

Vitara is drivers side offset front, centred rear.

In this case hilux diffs might be a better choice.
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

The vitara rear diff is already wider than A hilux Diff, I believe about 100mm?? (hence the very large backspace to the standard rims) so 80 series diffs are probably about the same?
Then again a stock vitara rim isn'r goingto fit on an 80 series axle, so it is neither here nor there :crazyeyes:
Posts: 638
Joined: Mon Nov 04, 2002 7:52 am
Location: A little north of sydney

Post by dave »

wound be an interesting build up
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Wendle wrote:The vitara rear diff is already wider than A hilux Diff, I believe about 100mm?? (hence the very large backspace to the standard rims) so 80 series diffs are probably about the same?
Then again a stock vitara rim isn'r goingto fit on an 80 series axle, so it is neither here nor there :crazyeyes:


Vitara is wider than 80 series by 100mm? That's make a 80/Lux diff about the same as a widetrack sierra diff. R u sure about this? I think we need to get some WMS measurements for each and compare. I'm pretty interested in these figures regardless.
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

Damo wrote:Vitara is wider than 80 series by 100mm?


No. Wider than a HILUX diff by ~100mm.
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

Still doesnt sound quite right to me, but it's probably the different offsets that confuse the issue. Thinking of it in that light i'm not so doubtful now.

But I prefer measurements to speculation 8)
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

Damo wrote:But I prefer measurements to speculation 8)


Same here, but after looking at Sam's buggy with a standard vitara rear and reversed rims, it is as wide as my GQ with landcruiser rims.
Some actual numbers would be nice to know. 8)
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm

Post by OVERKILL ENG »

My rear wheel track is 1620mm form the centre off the trread.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm

Post by OVERKILL ENG »

something to compare against
A GU with 15/8 is 1670mm
A 1994 hilux is 1470mm
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

overkill wrote:My rear wheel track is 1620mm form the centre off the trread.
SAM


Hilux WMS-WMS = 1397
80series WMS-WMS = 1595
These are from a very reputable source, but YMMV :finger:

So going off sam's measure and a bit of guessery, vitara would be ~1470?
Posts: 4065
Joined: Thu Oct 24, 2002 8:31 am
Location: ACT

Post by Wendle »

I think for a lightweight vehicle the vitara rear is perfect..
How strong is the carrier where the link mount threads are tapped into it??
Posts: 12
Joined: Fri Dec 20, 2002 1:38 pm
Location: Menai

Post by zookin »

Sam has just put hilux diffs in my short wheelbase.not much wider. but looks mental.
TFZOOK
Posts: 356
Joined: Thu Apr 03, 2003 2:55 pm
Location: Canberra

Post by zooker »

How much did it cost to put the hilux diffs in?
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests