Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tray Width (Tyre Coverage)

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Tray Width (Tyre Coverage)

Post by Hybrid »

Anyone know the width the tray needs to be to cover a standard hilux solid axle housing with standard offset rims and 12.5W tyres? I could probably sit down and work it out pretty close but I thought some of you boys that have made sustom trays would have a direct measurement somewhere. I'd be measuring mine off the pizza cutters and coming up with a formula to try to work it out.

Cheers

John
Top
User avatar
Aza
Posts: 3886
Joined: Thu Dec 12, 2002 4:41 pm
Location: Loganholme, Qld

Post by Aza »

mines approx 1800 off the top of my head, hides the tyres fine and wide enough to run a decent roll bar off
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Top
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Post by beebee »

Mine is 1730 from inside to inside of tubes. I just happened to fluke that measurement and my bogger just fit between them on compression but at ride height they're about 3" past the outside of the tubes. Most standard trays are 1800mm
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Top
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Post by Hybrid »

beebee wrote:Mine is 1730 from inside to inside of tubes. I just happened to fluke that measurement and my bogger just fit between them on compression but at ride height they're about 3" past the outside of the tubes. Most standard trays are 1800mm
Look who's got broadband. I don't need to hide boggers just yet. This is just for cutting down the alloy tray for the mean time.
Top
Posts: 1055
Joined: Sun Nov 16, 2003 3:46 pm
Location: Inala Ponds

Post by basketcase »

My tray is 1750mm, made to cover my 12.5's.
Top
Posts: 19
Joined: Tue Aug 16, 2005 7:19 pm
Location: brisbane bay side

Post by geff »

most standerd trays are 1800 mm wide to the outside man call tjm they will tell you good luck
Top
Posts: 1255
Joined: Thu Jul 03, 2003 8:07 pm
Location: Coffs Harbour

Post by STUMPY »

1800mm
DX80 35's twin locked turbo diesel = TANG
www.jaybeecanvas.com
Top
Posts: 713
Joined: Tue Nov 05, 2002 2:12 pm
Location: Brisbane

Post by Hybrid »

Sorry guys. Lost this thread. Thanks for the replies. Guess I'll go with 1750 - 1800. The tray that was on it hung out a good 150-200 either side. Bloody pig of a thing.

John
Top
Posts: 928
Joined: Tue Apr 06, 2004 5:42 pm
Location: newy

Post by customhilux »

mines 1745mm worked good for me, saved me alot times to.
You do not have the required permissions to view the files attached to this post.
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=47136]THE SUSLUX[/url]
[url=http://www.outerlimits4x4.com/PHP_Modules/phpBB2/viewtopic.php?t=50913]THE EXTRACAB[/url]
Top
Posts: 248
Joined: Sun Nov 14, 2004 6:40 pm
Location: Melbourne, Victoria.

Post by ditch »

Man I wish you made this thread before I made my tray! Mines 1600mm and is only about 10mm short on either side to clearing the body. Never mind when I make the roll bar it will cover the most part so I'll be fine
Top
User avatar
Aza
Posts: 3886
Joined: Thu Dec 12, 2002 4:41 pm
Location: Loganholme, Qld

Post by Aza »

ditch wrote:Man I wish you made this thread before I made my tray! Mines 1600mm and is only about 10mm short on either side to clearing the body. Never mind when I make the roll bar it will cover the most part so I'll be fine
i told u how wide mine was before u started making it :lol:
98 Xtra Cab Lux.... slowly filling up with the Budscustoms Catalogue : Street, Track & Trail - Parts & Fabrication
Budscustoms Facebook Page
Top
Posts: 248
Joined: Sun Nov 14, 2004 6:40 pm
Location: Melbourne, Victoria.

Post by ditch »

I forgot :P
Top
Posts: 38
Joined: Sun Apr 03, 2005 7:13 pm
Location: S.E melbourne

Post by brhandas »

bit of a highjack but what is the stock length of the earlier trays before they get attacked by the grinder?
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests