Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

koni shocks

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 201
Joined: Sun Apr 03, 2005 1:36 pm
Location: S/E melbourne

koni shocks

Post by lux kid »

does anyone run koni shocks on there rigs. i have a 4inch lift shortie GQ and was woundering what people think of them? last Q what lenght should i run. a part number would nice if anyone has them.
getting HALF CUT ready for mudbash 09.
hold on to your hats boys and girls.
Top
Posts: 372
Joined: Mon Nov 03, 2003 10:12 pm
Location: melbourne. sth eastern subs

Re: koni shocks

Post by bagsy »

lux kid wrote:does anyone run koni shocks on there rigs. i have a 4inch lift shortie GQ and was woundering what people think of them? last Q what lenght should i run. a part number would nice if anyone has them.
I dont run them ,but they do have an excellent reputation. You ll have to measure your open and closed shock lengths and go from there. Im pretty sure you ll need shocks from an 80 series because they re longer.
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
Top
Posts: 83
Joined: Mon Jul 11, 2005 3:16 am
Location: Under the shade of a Coolibah tree

Post by muttley »

Can't help you with the technical side, but I run them on 2" lift GU wagon. Can't wait to replace them with the big bore Tough Dog adjustables. The ride is fairly rugged offroad, so want to be able to soften it up a bit ;)
"Any fool can criticize, condemn and complain and most fools do" - Benjamin Franklin
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

muttley wrote:Can't help you with the technical side, but I run them on 2" lift GU wagon. Can't wait to replace them with the big bore Tough Dog adjustables. The ride is fairly rugged offroad, so want to be able to soften it up a bit ;)
Konis are adjustable.
Top
Posts: 899
Joined: Mon Mar 28, 2005 7:52 pm
Location: BrisVegas

Post by gu4800 »

I run Koni's on my GU Wagon - great ride (I didn't set them to hard - only about 1.5 turns from memory).

They are expensive, but then again fully serviceable at a reasonable price.

As for length, contact a Koni dealer - they should know. The guy I bought mine through here in Brisbane sets up rally cars and he certainly knew his stuff (he also rebuilds them).

GSA Wholesale - (07) 3808 4698 (not sure if he does retail though).
____________________
Dan

[quote="v840"]I bet you're the kind of person, when you're railing someone in the ass
you don't even have the common courtesy to give them a reach around! [/quote]
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

i ran koni's on my MQ i snapped one in half and blew both rears so i havent had good experiences with them
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
Posts: 117
Joined: Mon Sep 12, 2005 10:46 pm
Location: Norway

Contact:
Contact TLCOR

Post by TLCOR »

Can we have some pics of these Konis ? How are they valved, through each setting ?
Bling? Bling? Cling.
Top
Posts: 2621
Joined: Mon Nov 29, 2004 7:46 pm
Location: Springwood, Between Brisbane and GC

Contact:
Contact Suspension Stuff

Post by Suspension Stuff »

I can sell Koni's but I do not know too much about them. You wouldn't have trouble finding one to fit the front but I think you would have trouble finding one the right length for the rear. I can ask to be sure. You might be able to find someone to weld an eye on a shock for you.

You a probably better of saving your money and buying Procomps or Dobinsons. Another option is the Procomp MX6 adjustable if you are desperate for adjustable stuff. Not quite as reliable as your trusty non adjustable Procomps but good none the less.

Shane
We sell SUSPENSION - PRICES on
https://www.suspensionstuff.com.au" onclick="window.open(this.href);return false;
Free Freight 1300 048 991
FLEXY COILS - Superior Engineering - TIGERZ11 - Tough Dog - PROCOMP - Polyair - ETC
Top
Posts: 53
Joined: Fri Jul 30, 2004 8:20 pm

Post by 77F1004WD »

I have the 82 series Koni's in my GQ, with only a 2" lift. Couldn't be happier with them. In saying that i havn't gone offroad yet, but onroad, they made the car feel 100% better.
Top
Posts: 98
Joined: Tue Jun 01, 2004 10:44 pm
Location: Melbourne

Post by GQTrav »

I also run koni's on my LWB GQ and couldn't be happier with them. I have a 3 inch lift and when the shock is at full extension, the rear coil is loose enough to move around but not loose enough to fall out, the perfect length.
Top
Posts: 105
Joined: Sun Feb 13, 2005 9:22 am
Location: Bris, Qld

koni's

Post by Hutch »

I have the koni's on my 2 inch lifted GU ute. I have them set to about position 3. I hammered the crap out them last year on my trip through the Gulf/Kakadu/Gregory NP/ Gibb River /Mitchel falls/BungleBungles (13,500kms). No problems, no breaks, no leaks. They are a bit soft at the moment, but thats the way I want it anyway. Also I should mention that I have airbags inside the rears springs., and this helps a lot when carrying loads.

In my opinion you pay a bit extra for the koni's, but then again they are rebuildable.
:D
Here is a test to find whether your mission on earth is finished: If you’re alive it isn’t.
- Richard Bach
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests