Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Pitman arm removal

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
User avatar
Nev
Posts: 621
Joined: Wed May 25, 2005 10:00 am
Location: Brisbane, Australia

Pitman arm removal

Post by Nev »

trying to get the pitman arm off the steering box end to put in a new box. Are they on a tapered spline? What is the easiest way to get it off?
Thanks
01 GU Patrol 4.2TD Wagon
Top
Posts: 3187
Joined: Sat Dec 06, 2003 6:47 pm
Location: Sydney, or @ newy on weekends

Post by RB zook »

yeah there on a tapered spline

you need a pitman arm puller
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Top
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Post by Rhett »

ethier a puller or if the box is shagged take the nut off the bottom and the top off the box and flog the shaft through from the bottom with the biggist hammer you can find :twisted: . applying heat will also help ;)
Its a wheelbase thing
Top
User avatar
Nev
Posts: 621
Joined: Wed May 25, 2005 10:00 am
Location: Brisbane, Australia

Post by Nev »

ok cheers, thanks for the info!
01 GU Patrol 4.2TD Wagon
Top
Posts: 106
Joined: Fri Jul 22, 2005 11:26 pm
Location: Box Hill Victoria

Post by Krankieone »

used the following method a couple of times on a Chrysler Royal I had some years back

loosen nut off

take 2 hammers (large) hold one against the side of the pitman arm (part where the shaft goes through) and strike the oppersite side with the other hammer repeat until either it comes off or you give up and try to find a puller or a bigger hammer
97 TJ Wrangler OME lift 33"JT's
66 mustang
04 SS 5.7 (wifes)
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: Google [Bot] and 1 guest