Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

clunk in front diff

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 458
Joined: Tue May 24, 2005 12:21 pm
Location: Brisbane

clunk in front diff

Post by Josh n Kat »

hey guys got an 89 model gq patrol with an air locker in the front diff.

Was 4bing on the weekend and started to get a bad clunk noise very intermiediatly but only with it in low with the hubs locked, unlock the hubs and it wont make the noise. i dont think its a cv cause they usually go bang then the fun stops so it tends to lead me more towards the diff centre.... Any advice would be greatly appreciated
Posts: 458
Joined: Tue May 24, 2005 12:21 pm
Location: Brisbane

Post by Josh n Kat »

C'mon guys! i really would like some help with this. someone must have had a pinion gear shear off before!
The Haggler!
Posts: 6651
Joined: Sun Oct 20, 2002 8:48 pm

Post by ToNkA »

Josh n Kat wrote:C'mon guys! i really would like some help with this. someone must have had a pinion gear shear off before!
Maybe give it more than 1 hour and 44 minutes for those people to reply.

:roll:
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

CV joint

Bazzle
Posts: 3224
Joined: Mon Jan 12, 2004 6:03 pm
Location: Moggill

Post by phippsy »

When the cv went in my lux, it went clunk, bang, grind until I unlocked the hubs and it didn't make a noise for the 50km's I drove it home.
Posts: 458
Joined: Tue May 24, 2005 12:21 pm
Location: Brisbane

Post by Josh n Kat »

yeah my bad tonka, just got kinda anxious....

i'm not entirtely convinced its a busted cv though cause i can still drive 4b with the hubs locked and the noise is very intermitent.

what about the arb diff centres, anybody have them stuff up at all?
Posts: 221
Joined: Mon Sep 06, 2004 3:29 pm
Location: Sydney

Post by muzza_fattire »

The CV doesn't have to be 'busted' to make noise...
*****************
'88 GQ SWB TD42
Posts: 458
Joined: Tue May 24, 2005 12:21 pm
Location: Brisbane

Post by Josh n Kat »

thats also true, but it isn't noisy when you turn the wheel hard and drive. it makes the bad noise if im just cruising down hill just engine braking or cruising up hill just steadily accelerating
Posts: 716
Joined: Tue Jan 13, 2004 7:24 pm
Location: Melbourne

Post by TUFFRANGIE »

Have you drained the oil in the diff? Look out for large metal objects, might be a good place to start.
Posts: 268
Joined: Tue Apr 19, 2005 7:00 pm
Location: Brisbane

Post by Rangie ute on 38'' »

possibly circlip gone in the centre gears and the pins loose, hapened to me when one of the gears come off, smashed all the teeth and spat it out the diff casing, some times youd here a clunk and it was the pin moving up and down
Posts: 1153
Joined: Sat Apr 24, 2004 10:17 am
Location: Gold coast QLD

Post by Madmac »

could be that 1 or 2 teeth have come off the crown wheel, although usually when this happens you get a violent banging noise, check the oil for chunky metal bits
Posts: 458
Joined: Tue May 24, 2005 12:21 pm
Location: Brisbane

Post by Josh n Kat »

was that with an air locker centre rangie?
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

the bell on the cv is probably cracked, but check ur diff oil as posted earlier.
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 135 guests