Where is everyone

Post by **OVERKILL ENG** » Mon Nov 11, 2002 9:45 pm

Come on all you Zooks where are you lets get some talk going surly someone needs to know something.

Post by **skippy** » Mon Nov 11, 2002 10:06 pm

ok ok.....oooook.

anyone local to brisbane that can weld. and I don't mean make a nice warped pile of metallic poo.

I'll defintely need someone in the know when I go spoa with these new springs.

also, how on earth do you remove the pitman arm nut when the entire steering box is fubar? heat and rattle?

Post by **camskizook** » Tue Nov 12, 2002 9:57 am

How do i go about supercharging the 1 litre?

:rofl:

CAM

Post by **skippy** » Tue Nov 12, 2002 11:20 am

how do I put NOS onto a 1.3

Post by **SheZook** » Tue Nov 12, 2002 12:23 pm

Well now we're just being silly aren't we?

Imagine...a brick shithouse on roller blades being propelled by NOS? The panels would peel away from the chassis one by one.

Post by **OVERKILL ENG** » Tue Nov 12, 2002 12:25 pm

Suoercharging is easy get a blower of a 4agze and the rest is easy you can still run a carby .
Nos is also easy to fit you can get a second hand kit for about $200 I just sold the kit I had on my Zook at the nissan trials last year.
It gave me 30% more torque not bad for 25hp kit.

Post by **skippy** » Tue Nov 12, 2002 12:39 pm

sam,

I was serious when I was asking about the steering box in my first post though *LOL*

the NOs, well, I've already got the kit :roll:

but I doubt it will go onto the zook. it'll more than likely go onto the next proj vehicle(not a 4b).

Post by **SheZook** » Tue Nov 12, 2002 1:46 pm

Skip - did you get Jimbo's kit? I thought he was going to hook it up in the ute?

Post by **skippy** » Tue Nov 12, 2002 5:41 pm

yes jimbo gave me the kit. I'll use it on my next project.

he's now got twin turbo on the ute. pulls a low 13 down the 1/4 mile atm, and it's not even finished yet

Post by **OVERKILL ENG** » Tue Nov 12, 2002 9:43 pm

Skippy I assume you are talking about the nut that holds the pitman arm onto the steering box? A good rattle gun and a little bit of heat not to much though as you will damage the arm.

Post by **v8zuki** » Tue Nov 12, 2002 11:17 pm

who here in zook land is going to be at xrcc .i have entered , just putting finnishing touches on my zook.[ well this incarnation anyway]. :?:

Post by **OVERKILL ENG** » Wed Nov 13, 2002 8:27 am

I am hoping to be if the Zook is ready. I have entered.

Post by **v8zuki** » Thu Nov 14, 2002 7:07 pm

cool , see u there ,lets kick ass. show em how zuks realy go

Post by **skjtb** » Mon Nov 18, 2002 5:48 am

hey Skippy,
use a big bar to undo pitman are nut they are usually farkin tight. where are you getting you spring over pads from or are you making them yourself. I'm keen to have a look. would offer to weld them for you but I'm not the best welder.....but practice makes perfect apparently

.
good luck with it

Post by **bj on roids** » Mon Nov 18, 2002 4:21 pm

v8zuki wrote:cool , see u there ,lets kick ass. show em how zuks realy go

i will drive on your bonnet of yuo "tube zukis" if there is any bonnets left to be driving on

i will also break my shiat and wave as youse go back past me....but SHHHH

:twisted:

Post by **Ferwoaza** » Mon Nov 18, 2002 4:56 pm

Okay then Sam

Asking on behalf of my Girlfriend Heather who now has a nice little 1ltr 84 Zook...

We've put a 2" suspension lift on it and fixed up a head gasket problem..time to get the ball rolling now.

Wondering what's going to be the best way to progress?

Aim will be 31s, thinking I'll go body lift rather than SPOA to keep stability there...she's not going too hardcore...yet heh. I'm guessing R&P's will need to be updated but if we drop rock hoppers in, does this eliminate that need ie change hi range as well? Usual other stuff will be done as well, Snorkle, roll bars, bar work in general etc (well..it will be once I can find some bloody metal to practice my welding on...can't believe I still can't find any hehe recommendations on where to get scrap metal, tube and steel for sliders, bar work welcome as well! )

Pic of her beast as it is now..

Post by **Damo** » Mon Nov 18, 2002 5:01 pm

Been on leave for a couple of weeks so i've haven't got online much.

Unfortunately due to problems getting parts and dramas getting machining done etc progress has been pretty bloody slow, and it doesnt look like i'll get it back together in time for xrcc.

Tracked down some gear today, so let's hope it's what I need. Now all I have to do is find someone to get this machining done for me!!!!

Post by **skippy** » Tue Nov 19, 2002 7:22 pm

hey skjtb,

I'll be making my own perches for the spoa. found a welder today, so hopefully if a few projects finish soon I'll be good to go in january.

Post by **camskizook** » Tue Nov 19, 2002 8:34 pm

Murray the rockhopper for the 1 litre doesnt change high range ratio, only low range.. (I'm 99% sure of that as mine doesnt seemed to have changed on road). Its the best mod you can do but, and i like the crawl ratio mine has with the 1 litre diffs - 4.1 and 4.16 in the transfer case, which means the old 1 llitre goes good offroad when the carby isnt playing up.

Post by **cattzooks** » Fri Nov 22, 2002 7:06 pm

Hi guys. At least this forum doesn't have popups like the snake one

Post by **OVERKILL ENG** » Fri Nov 22, 2002 8:32 pm

Ferwoza if you use a 1.3 sierra transfer with rockhopper you won't need to change the diff ratios as they change high range as well.Also 1ltr diffs aren't thge same as 1.3 so to my knowledge there aren't other diff ratios for the 1ltr centres. Imay be wrong

Post by **nicbeer** » Wed Nov 27, 2002 7:50 pm

I am doing the conversion to efi using the TBI from the jap spec vitara 8v 1.6 but want to do the 4agze supercharger next.

What is needed and how easy is it to do it onto a 1.3 g13b.

Brackets sound easy but what else. I was going to run a switch for the supercharger to have it off when street driving to conserve fuel.

cheers

Post by **DeWsE** » Tue Jul 13, 2004 1:52 pm

Well I think this is should be dug up from the dead. Where is everyone it's so boring during the day!

Post by **bigsteve** » Tue Jul 13, 2004 2:17 pm

I'm working

Post by **DeWsE** » Tue Jul 13, 2004 2:20 pm

Oh thats rigfht that why I sit at this desk all day. I remember now :lol:

Post by **nicbeer** » Tue Jul 13, 2004 4:14 pm

Working at looking at the forum, have to got out soon for a equipment drop off.

At work like the rest of you I think

cheers

Outer Limits 4x4 Board

Where is everyone

Where is everyone

att overkill

Who is online