Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Interested in a Feroza locker?
Moderator: Tiny
Interested in a Feroza locker?
I found some info on the 4WD Monthly forum about lockers that were apparently made for Ferozas when they were first released. A guy who had one is willing to use his contacts to see if he can get a small production run going again.
So, if you are SERIOUSLY interested in a locker either post here or on the 4WD Monthly forum : http://www.4wdmonthly.com.au/forum/inde ... adid=12206
So, if you are SERIOUSLY interested in a locker either post here or on the 4WD Monthly forum : http://www.4wdmonthly.com.au/forum/inde ... adid=12206
Last edited by murcod on Mon Jan 23, 2006 12:25 pm, edited 1 time in total.
David
that dude has a factory fitted LSD!!!!!!
man i'd be VERY interested in a locker for sure! would put it to VERY good use until i could afford to swap the driveline out. i'm a college student so i'm broke as hell, but if given the opportunity, i'd beg, cry, pout, throw fits, and even steal if i have to in order to come up with the funds for one. meanwhile, i want an LSD!
[quote="simplypv"]its a Strine thing and i just dont understand![/quote]
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
I'm very interested in finding a locker. My inlaws just had their front diff welded, haven't tried it yet going for a run this weekend. So far this has been the only way to get more traction. Hope this all works out because I don't really want to trade in for a bigger 4x4. The feroza is a good little car and quite underestimated.
no... feroza locker.. learn to read!flynn wrote:rocky locker???
murcod.... please tell the guy there is pretty good interest and still growing. one problem though, i'm in the states so how would that go about? i'm sure maybe dave would be a bit interested as well.
[quote="simplypv"]its a Strine thing and i just dont understand![/quote]
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
Ok mate, ease up....
I've read it and nowhere is there even the mention of a ball park for a price...I'm very interested but it does depend to some extent on the price...
I was just wondering if there had been anyword of a price in PM's or emails that anyone may have received behind the scenes that was not on either of the forums...
thanks anyways,
I'm still very interested!
Luke
I've read it and nowhere is there even the mention of a ball park for a price...I'm very interested but it does depend to some extent on the price...
I was just wondering if there had been anyword of a price in PM's or emails that anyone may have received behind the scenes that was not on either of the forums...
thanks anyways,
I'm still very interested!
Luke
[url=http://www.aussiebowhunter.com][b]Founder TBGA - September 29, 2001 - Australia's Premier Bowhunting Site[/b][/url]
What the? I was just answering the question!?Bowhunter wrote:Ok mate, ease up....
There have been no private PM's between myself and Peter. My guess is price will be slightly more than the RRP of a production locker. But I doubt very much the whole thing will get off the ground- 15 people for a start, and the company needs to be persuaded to do a limited production run.
David
Id be down for this if I didn't have engine strife. Put me down as definitely interested though... just wont be cashed up for a little while :(
1996 XJ Jeep Cherokee - VERY red and VERY stock!
2001 KJ Jeep Cherokee - cooked her bad... sitting in the driveway!
[i]- ex Feroza man (eventually died on me) -[/i]
2001 KJ Jeep Cherokee - cooked her bad... sitting in the driveway!
[i]- ex Feroza man (eventually died on me) -[/i]
How're the numbers going people?? I think it still looks like only nine definitely inerested, but I could be wrong. I did float the idea thru the back door but they only said, "mmm, get enough people and we'll look at it!!" I asked how many was enough to get it done for sure, and the response had something to do with a piece of string and the noise of a cash register!!
My educated guess on price would ceratinly be more than $1200 and less than $2000, but it is a guess at this stage. The diff centres themselves are readily available, its getting the end fittings with splines and crown wheel support facings of the right size that take the time/effort/$$ If its a once off for Tractech, and the likelihood of some breakages, due to the SWB and weakish drive train, they may not judge it a good investment!
My educated guess on price would ceratinly be more than $1200 and less than $2000, but it is a guess at this stage. The diff centres themselves are readily available, its getting the end fittings with splines and crown wheel support facings of the right size that take the time/effort/$$ If its a once off for Tractech, and the likelihood of some breakages, due to the SWB and weakish drive train, they may not judge it a good investment!
Who is online
Users browsing this forum: No registered users and 17 guests