Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Guage help required..

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 510
Joined: Fri Feb 04, 2005 7:31 am
Location: Brisbane

Guage help required..

Post by whiteknight »

I have the standard Hilux dash but have got hold of the extra 2 gauges that came out on the SR5 (the oil temp and voltmeter) that fit in the gauge cluster.

I havent yet taken my gauge cluster out but was wondering if anyone knows if the wiring harness i need is sitting loose behind my dash already?

If I have to wire from scratch where does teh voltmeter connect to?
Posts: 1340
Joined: Sat Feb 15, 2003 8:29 pm
Location: ACT

Re: Guage help required..

Post by diesel028 »

whiteknight wrote:I have the standard Hilux dash but have got hold of the extra 2 gauges that came out on the SR5 (the oil temp and voltmeter) that fit in the gauge cluster.

I havent yet taken my gauge cluster out but was wondering if anyone knows if the wiring harness i need is sitting loose behind my dash already?

If I have to wire from scratch where does teh voltmeter connect to?
Volt Meter - try asking in the electrical section. Sounds like it should just be a wire to + battery (+) and a wire to ground (-). Not 100% sure tho.

I think youll find this one is oil pressure and not oil temp.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests