Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3B Turbo - oil pump capacity & oil ext. cooler?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 860
Joined: Mon Aug 02, 2004 3:11 pm
Location: AUS

3B Turbo - oil pump capacity & oil ext. cooler?

Post by scotto »

3B takes 7 or so litres of oil.

Am about to put a turbo on it and have a filter adaptor, to run through tranny type cooler. Thinking if I ran a big cooler it'd keep them running temp a bit lower.

Is there a limit to oil pump capacity of the 3B pump = should I limit to the size of the cooler I could run to help keep the oil temp down?

theory is it would run a bit cooler.
and with an intercooler would be better off if i crank up the boost :twisted:
But would I have problems with pump if I put say a 3 litre cooler on it?

Go the 3B :roll:

scotto
www.3rdrock4x4.com
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Re: 3B Turbo - oil pump capacity & oil ext. cooler?

Post by Shadow »

scotto wrote:3B takes 7 or so litres of oil.

Am about to put a turbo on it and have a filter adaptor, to run through tranny type cooler. Thinking if I ran a big cooler it'd keep them running temp a bit lower.

Is there a limit to oil pump capacity of the 3B pump = should I limit to the size of the cooler I could run to help keep the oil temp down?

theory is it would run a bit cooler.
and with an intercooler would be better off if i crank up the boost :twisted:
But would I have problems with pump if I put say a 3 litre cooler on it?

Go the 3B :roll:

scotto
As long as the cooler can flow enough it could be a 10000 litre cooler and it wouldnt matter. Does it take only partial flow, or does all your oil have to flow through it? If all your oild you would proababnly need a good 3/4" at least cooler. Any smaller and you will be inhibiting the flow of oil (possibly restricting the oil from getting to some places).

Some of those external filter/ oil cooler adapters have a temperature bypass so that the engine gets up to running temperature before the cooler is used. This is important as your engine runs exceptionally more efficiently at operating temp. If it doesnt have this your engine will take longer to warm up... (extending the period of high wear)
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest