Adjustable trailing arms

[shakes]

has anyone out there modified the std nissan GQ uppers and lowers. I know there weak as piss but I'm also not really cashed up (I really chose the wrong hobby hey?)

was chatting with a mate and the idea come up to chop the standard arms run 16mm? all thread down the centre a welded nut on one end and lock nuts down the other. Then to try get a lil strength back run some small gussets along the arms.

is this gunna be a waste of an afternoon and a set of arms or will it stop my vibrations for a few months till the bank balance is looking a bit better?

[Josh n Kat]

if you were gonna do something like that you'd wanna make sure your pretty handy with a welder and that you use the correct strength steel and stuff cause if that breaks while on the road your in big trouble

[Suspension Stuff]

I have made some up myself in the past but if you decide not to go for the bodge job I will sell you some new adjustable upper trailing arms for $280 for the pair. Free freight.
The adjustable lower ones are $380 for the pair but you only need uppers or lowers not both to correct your pinion angle.

Shane
0409 593 414
4WD STUFF

[blkmav]

What brand are your lowers and what bushes do they come with?

[Suspension Stuff]

Superior Engineering is who I use for that stuff.

www.suspensionstuff.com.au

Shane

[bru21]

heavy duty lowers. non adj. factory bushes $200.

i built them for mine but got 3rds sponsorship before i used them

0402337734

[GQTrav]

I got my heavy duty non adj. lowers for $130 brand new, this was from Trail Track and Outback in Ferntree Gully. This was without bushes.

[bru21]

mine inc good s/h factory bushes which are $60 each new roughly

[lux kid]

beer is one hell of a bargaining tool shakes.
i have the gear to mod anything and keen to give it a shot it even got spare bushs and a spare set of control arms.

[size=18][/size]so again call me and we can talk.