Tried to measure the threads on the tierod ends to make up a new steering arm, and they measured 17.2mm and 1.5mm pitch. Which one are they - metric - 17mm with 1.5mm pitch or imperial - 11/16 (17.4mm) with 16TPI? I'm thinking the later but i thought i'd check.
Does anyone have a left handed tap i can borrow?
Andrew.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
tie rod ends on steering arms. What thread???
Moderator: Micka
Thread is imperial. I have access to a tap but cant lend it out as it belongs to work!! I have made up a set for my RR and they are much better. I could make some rods for you if you like. Same material as MD ones but with 10mm wall instead of 8mm. $100 each plus postage...
peter
peter
Bloody Range Rover drivers !!!
Who is online
Users browsing this forum: No registered users and 34 guests