Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

going from 3L to 1KZTE

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 8
Joined: Tue Oct 11, 2005 8:18 pm

going from 3L to 1KZTE

Post by toyoboy »

just a question has anyone fitted a 1KZTE to a 4runner as i am thinking of fitting one and whats involved if i have to reweld engine mounts.
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Post by De-lux »

you might have more luck looking around in the toyota section. there is a fair bit of into involving the 3L.

good luck :cool:
indubitably
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

my mate just did that hope you have dollars n time on your side
change eng mounts
change the radiator
the gbox n transfer as it s bigger than the original and the orig won't suit .
tail shafts
and fit a 5l pump on it ,as to not need the computer connected
thats just a brief run down to begin with

also thats on a late model hilux there are differences to the old chassi as well
so there maybe a difference in the 4 runner chassi
Posts: 8
Joined: Tue Oct 11, 2005 8:18 pm

Post by toyoboy »

Thanks guys i have purchased a toyota hilux tray back that has been smashed and all the running gear is still ok so i have the gearbox & transfer case so its just a matter of time of the convernsion.
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

any help needed on info msg modified toy as it was him who did this to his own hilux
Posts: 8
Joined: Tue Oct 11, 2005 8:18 pm

Post by toyoboy »

Cheers mate i will let you know how it goes my runner already has a 4 inch body lift so i will be chasing a top mount intercooler.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests