Logan District 4x4 June Night Nav Run. Sat 14th.

Post by **RUFF** » Mon Jun 09, 2003 11:30 am

Here are the full details for this night run.

Post by **83 lux** » Tue Jun 10, 2003 4:28 pm

thank you

Post by **NICK** » Tue Jun 10, 2003 8:47 pm

Ruff, it is rated medium, does that mean we can take the poojero?

NICK

Post by **bubs** » Tue Jun 10, 2003 10:43 pm

awesome - now know which kfc :lol:

Post by **Area54** » Wed Jun 11, 2003 8:24 am

how much road driving from kfc to trail? highway or just backstreets?

Post by **CJer** » Wed Jun 11, 2003 6:11 pm

Sorry to be picky but Redbank Plaza is not in Redbank Plains.
It is in Redbank.
unless i am just reading it wrong :\

Post by **POS** » Wed Jun 11, 2003 6:36 pm

CJer wrote:Sorry to be picky but Redbank Plaza is not in Redbank Plains.
It is in Redbank.
unless i am just reading it wrong :\

SO ARE YOU GOING OR NOT!

Post by **CJer** » Wed Jun 11, 2003 6:39 pm

nope :(

Sandra has exams so i have the kids :(

Post by **RUFF** » Fri Jun 13, 2003 7:06 pm

Myself and Nick will be there in the runner.

Post by **beebee** » Fri Jun 13, 2003 7:36 pm

I'd go if I could borrow/hire some wheels and tyres for the night. Anything would be better than my 31" AT :finger:

If anyone is offering, ring 0439 998 260

Post by **RUFF** » Fri Jun 13, 2003 8:04 pm

Hire some Simex from Dog tyred or some claes from Fourbies.

Post by **Ferwoaza** » Sat Jun 14, 2003 8:36 am

Would anyone happen to have 2 free seats for the run?

Heather and I would like to come along but my rig aint up to it, needs a new engine mount...

Post here if you can, we can drive out to the meeting spot and leave the rig there no worries..

Post by **RUFF** » Sat Jun 14, 2003 8:44 am

Murrey go to Autobarn and get an engine mount or chain the engine down till you can get one. With a front locker you should be fine on this run.
I cant help with a seat,Nicks rig cant take passengers because the rear tailshaft rubs on the chassie.

Post by **bubs** » Sat Jun 14, 2003 10:35 am

RUFF wrote:Murrey go to Autobarn and get an engine mount or chain the engine down till you can get one. With a front locker you should be fine on this run.
I cant help with a seat,Nicks rig cant take passengers because the rear tailshaft rubs on the chassie.

scott will be bringing the 83

i will be bringing the 85

gotta get my new clutch master cylinder in today - done the spare tyre mount and got my 33" cooper on a rim yesterday

Post by **bubs** » Sat Jun 14, 2003 12:26 pm

clutch master cylinder is in now - works great

run down on replacing it

2hrs motivation
20mins to swap
5mins to bled
20mins fixing the fark up (not enough throw to disengage clutch)

now i need to drill 1 hole for a rear recovery point and i will be set

Post by **RUFF** » Sat Jun 14, 2003 12:39 pm

Buddy how did changing the Master Cyl affect the throw on the clutch?
Or did you change the Slave Cyl?

Im having the same prob at the moment.

Post by **bubs** » Sat Jun 14, 2003 1:00 pm

tony

my replacement master cylinder from powermax the screw on connector it supplys for the pedal when fully adjusted out was about 1.5cm short of the length of the one i pulled off, so i swapped the connector bit while it was all in because i had bled it by then - pita to do but it now works

Post by **Marshy** » Sat Jun 14, 2003 1:00 pm

Anyone got a navvy seat???
My driveshafts won't be done til Tuesday now. :cry:

Can't drive, so, if anyone wants an experienced nav....

Can meet at the start point.
What about you Nick? Piss that amateur RUFF off! I'll get you the outright win, this time!!! :lol:

Post by **bubs** » Sat Jun 14, 2003 1:02 pm

my clutch pedal you could see was too close to the floor

Post by **NICK** » Sat Jun 14, 2003 3:12 pm

bubs wrote:tony

my replacement master cylinder from powermax the screw on connector it supplys for the pedal when fully adjusted out was about 1.5cm short of the length of the one i pulled off, so i swapped the connector bit while it was all in because i had bled it by then - pita to do but it now works

had the same problem with mine, im thinking they are all like that.

NICK

Post by **bubs** » Sat Jun 14, 2003 3:13 pm

NICK wrote:
bubs wrote:tony

my replacement master cylinder from powermax the screw on connector it supplys for the pedal when fully adjusted out was about 1.5cm short of the length of the one i pulled off, so i swapped the connector bit while it was all in because i had bled it by then - pita to do but it now works

had the same problem with mine, im thinking they are all like that.

NICK

i thought they were ment to be a bolt in replacement :lol:

Post by **NICK** » Sat Jun 14, 2003 3:13 pm

Marshy wrote:What about you Nick? Piss that amateur RUFF off! I'll get you the outright win, this time!!!

thanks for the offer but i would rather win without giving the judges sexual favours!!!! :finger:

NICK

Post by **NICK** » Sat Jun 14, 2003 3:16 pm

bubs wrote:
NICK wrote:
bubs wrote:i thought they were ment to be a bolt in replacement

thats what i thought too, i took the first one back and was told that i had fitted it wrong :roll:

I swapped that and it did the same thing, so i took the whole car to the place that i got the cylinder from and said how the FAWK is that wrong, he then fixed it and worked out that the rod was too short, some how it was still my fault :roll:

NICK

Post by **Marshy** » Sat Jun 14, 2003 3:22 pm

NICK wrote:
Marshy wrote:What about you Nick? Piss that amateur RUFF off! I'll get you the outright win, this time!!!

thanks for the offer but i would rather win without giving the judges sexual favours!!!!

NICK

Depends who the judges are.........

Post by **bundyboy** » Sat Jun 14, 2003 11:16 pm

hi guys, saw the turn out tonight... pretty impressive

i was the jealous guy that kept on wagging work and peeking out the back door of the cinemas at redbank to look at the toys.

Anyway congrats.

I will definitely be there for the next one

Joel

Post by **RUFF** » Sun Jun 15, 2003 2:26 am

Were you standing outside with the security guard when me and Nick in the Red Bobbed 4runner went down to KFC?

Post by **POS** » Sun Jun 15, 2003 9:32 am

Yeah i saw him to!

The cinima door was opened and there was a silohette of someone standing there! He was there a couple of times! :lol:

Good run, it was nice to meet some of the other Outerlimits guys and girls!

Post by **Punchy** » Sun Jun 15, 2003 9:41 am

seriesboy wrote:hi guys, saw the turn out tonight... pretty impressive

i was the jealous guy that kept on wagging work and peeking out the back door of the cinemas at redbank to look at the toys.

Anyway congrats.

I will definitely be there for the next one

Joel

i saw ya there ya rotten peepin tom...why didn't ya come over and make ya self known....friendliest bunch a people there was

top run had a ball all be it finishing at 1.30 am .(spot the old bugga)
i went out with beebee and the tilly after a bit of a fix up and DOT and engineering approveable has come back firing on all 19 cylinders.!

looks forward to the next

ps i saw some pics going off there last night...bring it awwn girls ...where are they

Post by **Ferwoaza** » Sun Jun 15, 2003 10:15 am

Man, what a great run. Heaps of fun, bit o carnage too!!! Nick & Ruff did a CV on the 1st obstacle :lol:

And then I did one on the last :cry:

That's the last time I listen to you POS!!! j/k :lol:

Had a ball, I drove the hardline on everything but checkpoint 2 and the cp3 when I blew the CV.

Can't wait till the next one!!

Oh..and I didn't get any pics...

Post by **bubs** » Sun Jun 15, 2003 10:43 am

great run - my damage

Outer Limits 4x4 Board

Logan District 4x4 June Night Nav Run. Sat 14th.

Logan District 4x4 June Night Nav Run. Sat 14th.

Who is online