Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
IS THERE A REVOLUTION IN THE WINDS?
IS THERE A REVOLUTION IN THE WINDS?
Hope i'm not behind the times with this idea but haven't read anything about it before.
with sierras getting scarcer and the interest in them growing we may have to source other vehicles to modify.
enter the carry...
i know the rear leafs are the same set up and the rear diff is the samish(4 bolt). knowing suzuki i would bet the chassis is the same (or very similar) to the LWB sierras.
they came in 1.0 and 1.3 in vans utilitys etc. The shift linkage would probally be special but engines g/box etc should be the same..anyone with access to one with some know please insert head under for a look..
can you see where i'm heading with this?.......
1.6..transfer transplant..wider diffs front /rear..35's..'A' team paint job. wow its just flowing out of me.
there is enough sierra tech around to make this a real possability. however a cage and front bar would be a must. Imagine stepping out the cab onto your 35" boggers to step down..
and cheap base vehicle too.
anyone reconise the chassis ?
the newer ones are already 4wd too
any info you can contribut would be great as i havent had a real good look at one yet.
with sierras getting scarcer and the interest in them growing we may have to source other vehicles to modify.
enter the carry...
i know the rear leafs are the same set up and the rear diff is the samish(4 bolt). knowing suzuki i would bet the chassis is the same (or very similar) to the LWB sierras.
they came in 1.0 and 1.3 in vans utilitys etc. The shift linkage would probally be special but engines g/box etc should be the same..anyone with access to one with some know please insert head under for a look..
can you see where i'm heading with this?.......
1.6..transfer transplant..wider diffs front /rear..35's..'A' team paint job. wow its just flowing out of me.
there is enough sierra tech around to make this a real possability. however a cage and front bar would be a must. Imagine stepping out the cab onto your 35" boggers to step down..
and cheap base vehicle too.
anyone reconise the chassis ?
the newer ones are already 4wd too
any info you can contribut would be great as i havent had a real good look at one yet.
Whitvit,
I've thought about this myself. although with the older stlye carry van without the high roof. I've seen one up on a hoist with a SWB sierra sitting directly underneath, they were about the same wheel base. I first got the idea after seeing a Bedford van with a overlander setup up at wedge Is. I dont know about 35 boggers but maybe a set of 325/60 15 BF Goodrich (approx 31/12.5 R15) would keep the body roll down. And maybe not the A Team paint (i'd get sick of people throwing rocks at me.haha), maybe you have a twisted mind too, i like the idea. Maybe next time i've got an excess of cash and nothing better to do???
Tim
I've thought about this myself. although with the older stlye carry van without the high roof. I've seen one up on a hoist with a SWB sierra sitting directly underneath, they were about the same wheel base. I first got the idea after seeing a Bedford van with a overlander setup up at wedge Is. I dont know about 35 boggers but maybe a set of 325/60 15 BF Goodrich (approx 31/12.5 R15) would keep the body roll down. And maybe not the A Team paint (i'd get sick of people throwing rocks at me.haha), maybe you have a twisted mind too, i like the idea. Maybe next time i've got an excess of cash and nothing better to do???
Tim
Yeah Grimbo, our young pete is thinking hard about it. he has asked a few questions in the Diahatsu section, as they make a mini 4wd van as well.
There is also a guy in WA wheeling a L300
It wouldn’t be to hard to SPOA it, add some crawler gears, cut the wheel well and add some bigger tires. Just have to remember to keep some weight on the back!. Would make an awesome fishing/camping rig!
There is also a guy in WA wheeling a L300
It wouldn’t be to hard to SPOA it, add some crawler gears, cut the wheel well and add some bigger tires. Just have to remember to keep some weight on the back!. Would make an awesome fishing/camping rig!
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
then i shared my bed with 2 second tom... [/quote]
BRADEN TAGG, owner of XRO RACING
Oops time to step out of the cupboard
I have always had a Hafliger fetish, and a carry van cut down to the floor level is going to look a lot like one
the newer ones are full time 4x4 with no low range
but the old ones are selectable duel range,
picture one with a small set of muddies a pair of diff locks and a solid front axle, a nice bit of cage work going all the way to the back
it would be as flash as a rat with a gold tooth
I passed an older carry 4x4 tray last week (the first one I have ever seen) and it got me fired up, pity I couldn't catch it (I was in the truck), I know were a diahatsu 4x4 hijet van is, and it is for sale, but I realy want a suzuki.
Peter.
I have always had a Hafliger fetish, and a carry van cut down to the floor level is going to look a lot like one
the newer ones are full time 4x4 with no low range
but the old ones are selectable duel range,
picture one with a small set of muddies a pair of diff locks and a solid front axle, a nice bit of cage work going all the way to the back
it would be as flash as a rat with a gold tooth
I passed an older carry 4x4 tray last week (the first one I have ever seen) and it got me fired up, pity I couldn't catch it (I was in the truck), I know were a diahatsu 4x4 hijet van is, and it is for sale, but I realy want a suzuki.
Peter.
Cable bracing is the way of the future!
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Re: IS THERE A REVOLUTION IN THE WINDS?
SOME MORE... THEY ARE NOT REALLY CHEAP UNLESS THEY ARE RUSTED OUT...WHITVIT wrote:
i know the rear leafs are the same set up and the rear diff is the samish(4 bolt). knowing suzuki i would bet the chassis is the same (or very similar) to the LWB sierras....THESE ARE TOTALLY DIFFERENT..
they came in 1.0 and 1.3 in vans utilitys etc. The shift linkage would probally be special but engines g/box etc should be the same..anyone with access to one with some know please insert head under for a look.... THE ENGINES ARE NOT THE SAME AS A SIERRA.. SOME HAD A LJ 50 2 STROKE, F6A,F8A, G10A,AND A G13BB.
can you see where i'm heading with this?.......SURELY AM..
1.6..transfer transplant..wider diffs front /rear..35's..'A' team paint job. wow its just flowing out of me.BE KIND OF HARD AS THESE ENGINES ARE ALMOST LAYED OVER ON THERE SIDE.
the newer ones are already 4wd too... SURELY DO.. BUT ONLY IN THE UTE.
any info you can contribut would be great as i havent had a real good look at one yet.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
Wicked That is the perfect moter for a mini moon buggy, you won't even have to turn the diffs over!ed oorklep wrote:I know of someone who put an (old) carry motor into a sammy. Good news is they are exactly the same, bad news is the carry motor spins the other way So this guy had a sammy with 5 gears backwards and 1 forward
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
then i shared my bed with 2 second tom... [/quote]
Who is online
Users browsing this forum: No registered users and 77 guests