Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Question for the L28 Gurus
Question for the L28 Gurus
L28's run on plain old unleaded right? Is it okay to retard timing enough to eliminate ping and use ULP or am I better to just run on PULP. Also, why do some PULP's still ping and others do not? Best so far is BP ultimate. What do you blokes find?
92 NH Pajero, MQ Patrol 50mm lift. One has custom rust, dents & rattles, the other has a blown engine.
Re: Question for the L28 Gurus
L28s are fine for unleaded without any flashlube or anything....rhymus wrote:L28's run on plain old unleaded right? Is it okay to retard timing enough to eliminate ping and use ULP or am I better to just run on PULP. Also, why do some PULP's still ping and others do not? Best so far is BP ultimate. What do you blokes find?
Premium unleaded isnt needed at all.....
just change your timing so it doenst ping and it will run fine on Unleaded.
screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Thanks Mr. Screwball. Is it just a matter of winding back the timing or do other things need to change? For example points gap or heat range on plugs. Will there be a loss of performance? I can't afford to lose much!!
92 NH Pajero, MQ Patrol 50mm lift. One has custom rust, dents & rattles, the other has a blown engine.
Just tune it up and adjust the timing with maybe a new set of points ( standard gap ) and just run it on unleaded.
screwy
screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
God of Magnificant Ideas!
We've been using premimum over ULP for about the last 6 months in a variety of engines ..... 350 chevs, 308's, 253's, L28, 4 cylinder donks and even the rideon mower
getting better MPG,
geting much stronger horse power, ( yes it is noticable )
getting easier starting,
are the most noticable things ...... add to that ....
engine oil useage is lower, and is remaing much cleaner in its appearance.
ULP is shyte in comparision
Kingy

getting better MPG,

geting much stronger horse power, ( yes it is noticable )

getting easier starting,

are the most noticable things ...... add to that ....
engine oil useage is lower, and is remaing much cleaner in its appearance.

ULP is shyte in comparision
Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Re: Question for the L28 Gurus
rhymus wrote:L28's run on plain old unleaded right? Is it okay to retard timing enough to eliminate ping and use ULP or am I better to just run on PULP. Also, why do some PULP's still ping and others do not? Best so far is BP ultimate. What do you blokes find?
Some engines ping on any fuel due to the carbon build up on the pistons and/or the engine running too hot and igniting the fuel before the spark plug does.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Well they are all following you...
No they ain't, I'm just in front...............
Who is online
Users browsing this forum: No registered users and 4 guests