Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Head for a TB42 will a tb45 head fit

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Head for a TB42 will a tb45 head fit

Post by Guy »

My brother has done the head on his TB42, and has been looking for a few weeks for another pretty unsucessfully.

Apparently the tb42 heads are prone to cracking ...

Are the TB45 heads any better, and will it go on a Tb42 block

If not anyone know where to pick up a TB42 head in decent nick ...
If it does .. could you point me to find a TB45 head ....
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 789
Joined: Wed Aug 24, 2005 4:13 pm
Location: ACT

head

Post by CanberraMav »

Its probably cheaper to buy yourself an entire new motor than to stuff around with replacing the head. Shop around for a decent motor maybe.....should be able to get one for a grand or less. I have a head though if your interested.
Mud_runner_GQ says:
I need 1.6 metre long shocks
Top
Posts: 2195
Joined: Mon Dec 13, 2004 4:38 pm
Location: Sunny Coast, Queensland

Re: Head for a TB42 will a tb45 head fit

Post by Simo63 »

love_mud wrote:My brother has done the head on his TB42, and has been looking for a few weeks for another pretty unsucessfully.

Apparently the tb42 heads are prone to cracking ...

Are the TB45 heads any better, and will it go on a Tb42 block

If not anyone know where to pick up a TB42 head in decent nick ...
If it does .. could you point me to find a TB45 head ....
I believe they do. A guy I know up Gympie way put a 4.5 head on a 4.2 block and he reckoned it bolted straight on and the thing flew. Interested to hear if anyone else has had the same experience.

Cheers
Simo
Top
Posts: 454
Joined: Sat Oct 09, 2004 8:26 am
Location: Brissy

Head

Post by The Big Green Meany »

Apparently they are the same block and the heads "should" bolt straight on.

If you hunt around you can get a 4500 and loon for well under the $3k mark, You will just need a computer.
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

Found this on the for sale board, why bother with a head replacement when you can have a new motor!

http://www.outerlimits4x4.com/PHP_Modul ... hp?t=57800

Hope it helps dude!

Paul
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

i thought the TB45 was a stroked TB42, so it should fit. the TB48 was then bored, or was it bored first then stroked????? :?:
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests